<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD Journal Publishing with OASIS Tables v3.0 20080202//EN" "journalpub-oasis3.dtd">
<article xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:oasis="http://docs.oasis-open.org/ns/oasis-exchange/table" xml:lang="en" dtd-version="3.0">
  <front>
    <journal-meta><journal-id journal-id-type="publisher">AMT</journal-id><journal-title-group>
    <journal-title>Atmospheric Measurement Techniques</journal-title>
    <abbrev-journal-title abbrev-type="publisher">AMT</abbrev-journal-title><abbrev-journal-title abbrev-type="nlm-ta">Atmos. Meas. Tech.</abbrev-journal-title>
  </journal-title-group><issn pub-type="epub">1867-8548</issn><publisher>
    <publisher-name>Copernicus Publications</publisher-name>
    <publisher-loc>Göttingen, Germany</publisher-loc>
  </publisher></journal-meta>
    <article-meta>
      <article-id pub-id-type="doi">10.5194/amt-11-6525-2018</article-id><title-group><article-title>Analysis of a warehouse fire smoke plume over Paris with an <inline-formula><mml:math id="M1" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman lidar
and an optical thickness matching algorithm</article-title><alt-title>Analysis of a warehouse fire smoke plume over Paris</alt-title>
      </title-group><?xmltex \runningtitle{Analysis of a warehouse fire smoke plume over Paris}?><?xmltex \runningauthor{X. Shang et al.}?>
      <contrib-group>
        <contrib contrib-type="author" corresp="yes" rid="aff1 aff2">
          <name><surname>Shang</surname><given-names>Xiaoxia</given-names></name>
          <email>xiaoxia.shang@fmi.fi</email>
        <ext-link>https://orcid.org/0000-0001-9762-6672</ext-link></contrib>
        <contrib contrib-type="author" corresp="no" rid="aff1">
          <name><surname>Chazette</surname><given-names>Patrick</given-names></name>
          
        <ext-link>https://orcid.org/0000-0002-6230-2982</ext-link></contrib>
        <contrib contrib-type="author" corresp="no" rid="aff1">
          <name><surname>Totems</surname><given-names>Julien</given-names></name>
          
        <ext-link>https://orcid.org/0000-0002-1038-455X</ext-link></contrib>
        <aff id="aff1"><label>1</label><institution>Laboratoire des Sciences du Climat et de l'Environnement (LSCE),
Institut Pierre Simon Laplace (IPSL), CEA-CNRS-UVSQ, UMR 8212,
Gif-sur-Yvette, France</institution>
        </aff>
        <aff id="aff2"><label>a</label><institution>now at: Finnish Meteorological Institute, P.O. Box 1627, 70211,
Kuopio, Finland</institution>
        </aff>
      </contrib-group>
      <author-notes><corresp id="corr1">Xiaoxia Shang (xiaoxia.shang@fmi.fi)</corresp></author-notes><pub-date><day>7</day><month>December</month><year>2018</year></pub-date>
      
      <volume>11</volume>
      <issue>12</issue>
      <fpage>6525</fpage><lpage>6538</lpage>
      <history>
        <date date-type="received"><day>1</day><month>August</month><year>2018</year></date>
           <date date-type="rev-request"><day>20</day><month>August</month><year>2018</year></date>
           <date date-type="rev-recd"><day>14</day><month>November</month><year>2018</year></date>
           <date date-type="accepted"><day>27</day><month>November</month><year>2018</year></date>
      </history>
      <permissions>
        
        
      <license license-type="open-access"><license-p>This work is licensed under the Creative Commons Attribution 4.0 International License. To view a copy of this licence, visit <ext-link ext-link-type="uri" xlink:href="https://creativecommons.org/licenses/by/4.0/">https://creativecommons.org/licenses/by/4.0/</ext-link></license-p></license></permissions><self-uri xlink:href="https://amt.copernicus.org/articles/11/6525/2018/amt-11-6525-2018.html">This article is available from https://amt.copernicus.org/articles/11/6525/2018/amt-11-6525-2018.html</self-uri><self-uri xlink:href="https://amt.copernicus.org/articles/11/6525/2018/amt-11-6525-2018.pdf">The full text article is available as a PDF file from https://amt.copernicus.org/articles/11/6525/2018/amt-11-6525-2018.pdf</self-uri>
      <abstract>
    <p id="d1e115">A smoke plume, coming from an accidental fire in a textile
warehouse in the north of Paris, covered a significant part of the Paris area
on 17 April 2015 and seriously impacted the visibility over the megalopolis.
This exceptional event was sampled with an automatic <inline-formula><mml:math id="M2" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman
lidar, which operated 15 km south of Paris. The industrial pollution episode
was concomitant with the long-range transport of dust aerosols originated
from the Sahara, and with the presence of an extended stratus cloud cover. The
analysis of the ground-based lidar profiles therefore required the
development of an original inversion algorithm, using a top-down aerosol
optical thickness matching (TDAM) approach. This study is, to the best of our
knowledge, the first lidar measurement of a fresh smoke plume, emitted only a
few hours after an accidental warehouse fire. Vertical profiles of the
aerosol extinction coefficient, depolarization ratio, and lidar ratio are derived to
optically characterize the aerosols that form the plume. We found a lidar
ratio close to <inline-formula><mml:math id="M3" display="inline"><mml:mrow><mml:mn mathvariant="normal">50</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">10</mml:mn></mml:mrow></mml:math></inline-formula> sr for this fire smoke aerosol layer. The particle
depolarization ratio is low, <inline-formula><mml:math id="M4" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">1</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.1</mml:mn></mml:mrow></mml:math></inline-formula> %, suggesting the presence
of either small particles or spherical hydrated aerosols in that layer. A
Monte Carlo algorithm was used to assess the uncertainties on the optical
parameters and to evaluate the TDAM algorithm.</p>
  </abstract>
    </article-meta>
  </front>
<body>
      

<sec id="Ch1.S1" sec-type="intro">
  <title>Introduction</title>
      <p id="d1e162">Accidental fires cause casualties and significant property damages. In
France, one house fire occurs every 2 min, adding up to 263 000 domestic
fires each year, causing about 100 deaths and 10 000 injuries
(<uri>http://iaaifrance.fr/</uri>, last access: 3 December 2018). These fires also emit large amounts of gases and aerosols, which
are detrimental to human health and degrade visibility. The aerosols have a
notable role in cloud formation and in the atmospheric radiative budget
(Kanitz et al., 2013). Concerning accidental fires, the meteorological
situation has an important role in fire and smoke propagation, especially
wind force and direction. In return, fires influence the dynamics and the
chemistry of the atmosphere, mainly in the atmospheric boundary layer (ABL)
and the low free troposphere. Modelling tools are needed to predict regional
aerosol emissions from large fires and analyse emergency policy options.
However, the characterization of fire emissions remains incomplete, mainly
due to the difficulty of obtaining young smoke samples. Their
unpredictability poses an obvious challenge for the performance of chemical and
meteorological measurements.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F1" specific-use="star"><caption><p id="d1e170"><bold>(a)</bold> Locations of the textile warehouse on fire (red
circle), of lidar instruments (purple star), and of the sun photometer
(orange triangle); <bold>(b)</bold> photo of the smoke plume from near (left) and
far (right) distance; <bold>(c)</bold> in situ measurements of PM<inline-formula><mml:math id="M5" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">10</mml:mn></mml:msub></mml:math></inline-formula> from
four Airparif stations (locations shown in <bold>a</bold>). The alert and information
values are also given by the red and yellow dashed lines.</p></caption>
        <?xmltex \igopts{width=398.338583pt}?><graphic xlink:href="https://amt.copernicus.org/articles/11/6525/2018/amt-11-6525-2018-f01.png"/>

      </fig>

      <p id="d1e199">Lidar is an efficient technique for the detection of various types of
particles along the altitude, such as ash, air pollution, dust, and biomass
burning aerosols (Ansmann et al., 2012; Chazette et al., 2007, 2012; Mattis
et al., 2010; Müller et al., 2007; Royer et al., 2011; Weitkamp, 2005).
Lidar-derived parameters can be effective constraints for chemical transport
models (Binietoglou et al., 2015; Haustein et al., 2009; Wang et al., 2014).
Raman lidars, in particular, are becoming well-established tools that are
used in the study of numerous areas of importance in the atmospheric sciences
(Ansmann et al., 1992; Behrendt et al., 2007; Di Girolamo, 2004; Whiteman,
2003). The use of both Raman- and elastic-backscatter lidar signals allows
the independent retrieval of the aerosol extinction and backscatter
coefficients (e.g. Ansmann et al., 1992). This technique also enables the
retrieval of the<?pagebreak page6526?> extinction-to-backscatter ratio, also called lidar ratio
(LR), and the linear particle depolarization ratio (PDR). The LR is considered an
important criterion to analyse atmospheric aerosols, as it depends on their
single scattering albedo and backscatter phase function, and is thus a
function of size distribution and chemical composition. The PDR provides
information on the shape of the scattering particles, allowing the
identification of several aerosol types.</p>
      <p id="d1e202">Raman lidar data processing remains a complex matter. Three kinds of
algorithms are available: (1) single-layer aerosol optical thickness (AOT)
constrained Klett inversion, which is a conventional approach based on the
Klett algorithm (Klett, 1981), using the <inline-formula><mml:math id="M6" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman AOT to choose a
column-equivalent LR (CLR; Ansmann et al., 1990, 1992); (2) standard Raman
inversion, based on the numerical derivative of the <inline-formula><mml:math id="M7" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman
channel to retrieve the extinction profile, but introducing noise (Pappalardo
et al., 2004; Whiteman, 1999); (3) Raman-constrained regularization, such as
the Tikhonov method (Tikhonov and Arsenin, 1978), solving the lidar equation
to retrieve the aerosol extinction and backscatter coefficient
profiles simultaneously (Royer et al., 2011; Shcherbakov, 2007). As an intermediate,
Ansmann (2006) applied the two-layer approach of the Klett method to determine
a pair of column lidar ratios for the boundary layer and for the lofted
free tropospheric aerosol layer. Yet all these approaches are based on the
premise that the elastic channel maximum range can reach an altitude where
the backscattered signal is dominated by its molecular contribution (with
pure Rayleigh scattering), so as to normalize the signal. We will hereafter
call this altitude the Rayleigh zone. One cannot invert the lidar profile if
low clouds obstruct the signal or if aerosol layers are present within the
hypothetic Rayleigh zone. Moreover, in the presence of a plume from a large
fire, it is very common to observe the formation of clouds inside or at the
top of the plume, since a fire releases large amounts of water vapour in the
atmosphere. The strong AOT of the plume may significantly limit the lidar
maximum range, inducing a marked decrease of the signal-to-noise ratio (SNR) in the
Rayleigh zone. Thus, it may be more interesting to find a reference at a
lower altitude to invert the lidar vertical profiles.</p>
      <p id="d1e228">On 17 April 2015, we were able to sample a freshly emitted smoke plume from
an accidental fire using a <inline-formula><mml:math id="M8" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman lidar located at Palaiseau
(48<inline-formula><mml:math id="M9" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>42<inline-formula><mml:math id="M10" display="inline"><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:math></inline-formula>23<inline-formula><mml:math id="M11" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>′</mml:mo><mml:mo>′</mml:mo></mml:mrow></mml:msup></mml:math></inline-formula> N, 2<inline-formula><mml:math id="M12" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>13<inline-formula><mml:math id="M13" display="inline"><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:math></inline-formula>22<inline-formula><mml:math id="M14" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>′</mml:mo><mml:mo>′</mml:mo></mml:mrow></mml:msup></mml:math></inline-formula> E), <inline-formula><mml:math id="M15" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 15 km south of
Paris. This fire, of great magnitude, occurred <inline-formula><mml:math id="M16" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 5 km north of Paris in
a 12 000 m<inline-formula><mml:math id="M17" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:math></inline-formula> textile warehouse located in the commercial area of La
Courneuve (48<inline-formula><mml:math id="M18" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>55<inline-formula><mml:math id="M19" display="inline"><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:math></inline-formula>52<inline-formula><mml:math id="M20" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>′</mml:mo><mml:mo>′</mml:mo></mml:mrow></mml:msup></mml:math></inline-formula> N, 2<inline-formula><mml:math id="M21" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>23<inline-formula><mml:math id="M22" display="inline"><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:math></inline-formula>52<inline-formula><mml:math id="M23" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>′</mml:mo><mml:mo>′</mml:mo></mml:mrow></mml:msup></mml:math></inline-formula> E). The
warehouse was totally burned down. To analyse the lidar data recorded during
this event, we had to develop a new Raman lidar inversion approach for
ground-based measurements, which we call hereafter the top-down aerosol
optical thickness matching (TDAM) approach, based on the Klett algorithm.
TDAM makes it possible to retrieve the LR profiles with more vertical detail,
even when a Rayleigh zone cannot be reached by the lidar.</p>
      <p id="d1e387">This paper is organized as follows. In Sect. 2, we introduce the accidental
fire event and lidar instrument. In Sect. 3 we recall the theory by
presenting the equations and the basic variables associated with <inline-formula><mml:math id="M24" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman lidar analysis. In the same section, we then present some
standard inversions and introduce our new TDAM approach. An uncertainty study
is also proposed at the end of that section. The application of TDAM to the
warehouse fire smoke plume that passed over the ground-based lidar is
discussed in Sect. 4. Section 5 is devoted to the conclusion.</p>
</sec>
<?pagebreak page6527?><sec id="Ch1.S2">
  <?xmltex \opttitle{Accidental fire and its sampling from ground-based {$\chem{N_{{2}}}$} Raman
lidar}?><title>Accidental fire and its sampling from ground-based <inline-formula><mml:math id="M25" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman
lidar</title>
<sec id="Ch1.S2.SS1">
  <title>Accidental fire of a warehouse</title>
      <p id="d1e424">On 17 April 2015, a violent fire broke out around 14:00 local time
(12:00 UTC), in a 12 000 m<inline-formula><mml:math id="M26" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:math></inline-formula> two-storey textile and footwear warehouse
in La Courneuve, Seine-Saint-Denis, France (48<inline-formula><mml:math id="M27" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>55<inline-formula><mml:math id="M28" display="inline"><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:math></inline-formula>52<inline-formula><mml:math id="M29" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>′</mml:mo><mml:mo>′</mml:mo></mml:mrow></mml:msup></mml:math></inline-formula> N
2<inline-formula><mml:math id="M30" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>23<inline-formula><mml:math id="M31" display="inline"><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:math></inline-formula>52<inline-formula><mml:math id="M32" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>′</mml:mo><mml:mo>′</mml:mo></mml:mrow></mml:msup></mml:math></inline-formula> E; Fig. 1). The plume quickly rose in the lower free
troposphere, just above the ABL, by pyro-convection. Black smoke covered the
north area of Paris, as shown in Fig. 1b. With a wind speed of
<inline-formula><mml:math id="M33" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 22 km h<inline-formula><mml:math id="M34" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>, the smoke plume rapidly spread from the
north–north-east to the south–south-west of Paris. There were no casualties,
but property damages were assessed to be around EUR 40 million. Around 150
firemen and 40 fire trucks participated in the fire fighting. The burning
materials were mainly plastic, cloth, wood, paper, etc. (video of the fire at
<uri>https://www.youtube.com/watch?v=0hC52-pEmu8</uri>, last access: 3 December 2018). The societal impact was also rather important,
as the traffic was severely disrupted on numerous motorways and railways of
the northern Paris area for <inline-formula><mml:math id="M35" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">10</mml:mn></mml:mrow></mml:math></inline-formula> h. A strong smell of smoke and
burned plastic spread throughout Paris from that fire and reached the
location of the ground-based lidar around 17:00 local time.</p>
</sec>
<sec id="Ch1.S2.SS2">
  <?xmltex \opttitle{Instrument: {$\chem{N_{{2}}}$} Raman lidar}?><title>Instrument: <inline-formula><mml:math id="M36" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman lidar</title>
      <p id="d1e547">The <inline-formula><mml:math id="M37" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman LAASURS (Lidar for Automatic Atmospheric Surveys
using Raman Scattering) was put into operation in Palaiseau
(48<inline-formula><mml:math id="M38" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>42<inline-formula><mml:math id="M39" display="inline"><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:math></inline-formula>23<inline-formula><mml:math id="M40" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>′</mml:mo><mml:mo>′</mml:mo></mml:mrow></mml:msup></mml:math></inline-formula> N 2<inline-formula><mml:math id="M41" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>13<inline-formula><mml:math id="M42" display="inline"><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:math></inline-formula>22<inline-formula><mml:math id="M43" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>′</mml:mo><mml:mo>′</mml:mo></mml:mrow></mml:msup></mml:math></inline-formula> E; Fig. 1a), south-west of
Paris, to sample the fire smoke plumes. The direct distance between the
locations of the fire and the lidar site is <inline-formula><mml:math id="M44" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">28</mml:mn></mml:mrow></mml:math></inline-formula> km.</p>
      <p id="d1e632">LAASURS is already well described and validated by Royer et al. (2011) and
Chazette et al. (2012). Its characteristics are summarized in Table 1; it can
be remotely controlled and can work under almost all weather conditions
thanks to an air conditioning system and a funnel equipped with air blowers
above the optical windows (Fig. 2). LAASURS uses an emission wavelength of
355 nm and is designed to fulfil eye-safety conditions at its output. It is
composed of two reception channels: one dedicated to the measurement of the
co- and cross-polarized signals at <inline-formula><mml:math id="M45" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">355</mml:mn></mml:mrow></mml:math></inline-formula> nm and the other to the
inelastic nitrogen Raman backscattered signal at <inline-formula><mml:math id="M46" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">387</mml:mn></mml:mrow></mml:math></inline-formula> nm. Using a
high-speed digitizer card with 200 MHz sampling frequency, it enables the
retrieval of aerosol optical properties and atmospheric structures with an
initial/final resolution of 0.75/45 m along the line of sight.</p>

<?xmltex \floatpos{t}?><table-wrap id="Ch1.T1"><caption><p id="d1e658">Characteristics of LAASURS.</p></caption><oasis:table frame="topbot"><oasis:tgroup cols="2">
     <oasis:colspec colnum="1" colname="col1" align="left"/>
     <oasis:colspec colnum="2" colname="col2" align="left"/>
     <oasis:thead>
       <oasis:row>
         <oasis:entry colname="col1">Laser type</oasis:entry>
         <oasis:entry colname="col2">Nd:YAG</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1"/>
         <oasis:entry colname="col2">20 Hz</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1"/>
         <oasis:entry colname="col2">16 mJ @355 nm</oasis:entry>
       </oasis:row>
     </oasis:thead>
     <oasis:tbody>
       <oasis:row>
         <oasis:entry colname="col1">Reception channels</oasis:entry>
         <oasis:entry colname="col2">Elastic // (355 nm)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1"/>
         <oasis:entry colname="col2">Elastic <inline-formula><mml:math id="M47" display="inline"><mml:mo>⊥</mml:mo></mml:math></inline-formula> (355 nm)</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1"/>
         <oasis:entry colname="col2"><inline-formula><mml:math id="M48" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman (387 nm)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">Reception diameter</oasis:entry>
         <oasis:entry colname="col2">15 cm</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">Field of view</oasis:entry>
         <oasis:entry colname="col2"><inline-formula><mml:math id="M49" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">2</mml:mn><mml:mo>×</mml:mo><mml:mn mathvariant="normal">0.67</mml:mn></mml:mrow></mml:math></inline-formula> mrad</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">Detector</oasis:entry>
         <oasis:entry colname="col2">Photomultiplier tubes</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">Filter bandwidth</oasis:entry>
         <oasis:entry colname="col2">0.3 nm</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">Raw/final vertical resolution</oasis:entry>
         <oasis:entry colname="col2">0.75 m/45 m</oasis:entry>
       </oasis:row>
     </oasis:tbody>
   </oasis:tgroup></oasis:table></table-wrap>

      <?xmltex \floatpos{t}?><fig id="Ch1.F2"><caption><p id="d1e805">The <inline-formula><mml:math id="M50" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman LAASURS system at the Palaiseau site.</p></caption>
          <?xmltex \igopts{width=150.799606pt}?><graphic xlink:href="https://amt.copernicus.org/articles/11/6525/2018/amt-11-6525-2018-f02.png"/>

        </fig>

</sec>
<sec id="Ch1.S2.SS3">
  <title>Raw observations from lidar</title>
      <p id="d1e831">The 10 h lidar observations of the atmosphere following the fire event are
presented in Fig. 3, using the temporal evolutions of vertical profiles of
both the elastic range-corrected signal (<inline-formula><mml:math id="M51" display="inline"><mml:mrow><mml:msub><mml:mi>S</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>) and volume
depolarization ratio (VDR). Three main aerosol layers can be easily located
in the low troposphere: (i) the ABL during the day and the nocturnal layer
(NL) during the night, under <inline-formula><mml:math id="M52" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">1.2</mml:mn></mml:mrow></mml:math></inline-formula> km a.m.s.l. (above mean see level),
(ii) a thin non-depolarizing layer close to 1.2 km a.m.s.l. with a strong
backscatter signal (smoke layer), and (iii) a more depolarizing layer between
1.8 and 3 km a.m.s.l. The lidar signals are drawn with a time resolution of
1 min and a vertical resolution of 45 m. During this event, there are a
significant number of profiles impacted by low clouds, which makes the lidar
inversion a challenge. Also, a good vertical resolution of lidar parameters
is required to investigate the very thin smoke layer.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F3" specific-use="star"><caption><p id="d1e861">Time series, from 17 April 2015 at 18:50 UTC to 18 April 2015 at 05:00 UTC, of the profiles of <bold>(a)</bold> elastic range-corrected signal
(<inline-formula><mml:math id="M53" display="inline"><mml:mrow><mml:msub><mml:mi>S</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>) and <bold>(b)</bold> volume depolarization ratio
(VDR).</p></caption>
          <?xmltex \igopts{width=426.791339pt}?><graphic xlink:href="https://amt.copernicus.org/articles/11/6525/2018/amt-11-6525-2018-f03.png"/>

        </fig>

</sec>
</sec>
<sec id="Ch1.S3">
  <title>Algorithms</title>
<sec id="Ch1.S3.SS1">
  <title>Basic lidar theory</title>
      <p id="d1e903">Starting from the well-known lidar equation (Measures, 1984), the
backscattered lidar signal can be corrected for the<?pagebreak page6528?> sky background, the solid
angle, and the overlap function to obtain the range-corrected lidar signal
(RCLS) <inline-formula><mml:math id="M54" display="inline"><mml:mrow><mml:msub><mml:mi>S</mml:mi><mml:mi mathvariant="italic">λ</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>. The RCLS of the elastic (E) and the Raman (R) channel
are expressed at altitude <inline-formula><mml:math id="M55" display="inline"><mml:mi>z</mml:mi></mml:math></inline-formula> as

                <disp-formula specific-use="align" content-type="numbered"><mml:math id="M56" display="block"><mml:mtable displaystyle="true"><mml:mtr><mml:mtd><mml:mstyle class="stylechange" displaystyle="true"/></mml:mtd><mml:mtd><mml:mrow><mml:mstyle displaystyle="true" class="stylechange"/><mml:msub><mml:mi>S</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow></mml:msub><mml:mfenced close=")" open="("><mml:mi>z</mml:mi></mml:mfenced><mml:mo>=</mml:mo><mml:msub><mml:mi>K</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow></mml:msub><mml:mo>⋅</mml:mo><mml:mfenced open="[" close="]"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">β</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">mol</mml:mi></mml:msubsup><mml:mfenced open="(" close=")"><mml:mi>z</mml:mi></mml:mfenced><mml:mo>+</mml:mo><mml:msubsup><mml:mi mathvariant="italic">β</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup><mml:mfenced open="(" close=")"><mml:mi>z</mml:mi></mml:mfenced></mml:mrow></mml:mfenced></mml:mrow></mml:mtd></mml:mtr><mml:mlabeledtr id="Ch1.E1"><mml:mtd/><mml:mtd><mml:mstyle displaystyle="true" class="stylechange"/></mml:mtd><mml:mtd><mml:mrow><mml:mstyle displaystyle="true" class="stylechange"/><?xmltex \hack{\hspace{5mm}}?><mml:mo>⋅</mml:mo><mml:mi>exp⁡</mml:mi><mml:mfenced close="}" open="{"><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">2</mml:mn><mml:munderover><mml:mo movablelimits="false">∫</mml:mo><mml:mn mathvariant="normal">0</mml:mn><mml:mi>z</mml:mi></mml:munderover><mml:mfenced close="]" open="["><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">mol</mml:mi></mml:msubsup><mml:mfenced close=")" open="("><mml:mrow><mml:mi>z</mml:mi><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:mrow></mml:mfenced><mml:mo>+</mml:mo><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup><mml:mfenced close=")" open="("><mml:mrow><mml:mi>z</mml:mi><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:mrow></mml:mfenced></mml:mrow></mml:mfenced><mml:mo>⋅</mml:mo><mml:mi mathvariant="normal">d</mml:mi><mml:mi>z</mml:mi><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:mrow></mml:mfenced></mml:mrow></mml:mtd></mml:mlabeledtr><mml:mtr><mml:mtd><mml:mstyle displaystyle="true" class="stylechange"/></mml:mtd><mml:mtd><mml:mrow><mml:mstyle class="stylechange" displaystyle="true"/><mml:msub><mml:mi>S</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">R</mml:mi></mml:msub></mml:mrow></mml:msub><mml:mfenced open="(" close=")"><mml:mi>z</mml:mi></mml:mfenced><mml:mo>=</mml:mo><mml:msub><mml:mi>K</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">R</mml:mi></mml:msub></mml:mrow></mml:msub><mml:mo>⋅</mml:mo><mml:msub><mml:mi>N</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">R</mml:mi></mml:msub></mml:mrow></mml:msub><mml:mo>(</mml:mo><mml:mi>z</mml:mi><mml:mo>)</mml:mo><mml:mo>⋅</mml:mo><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:mi mathvariant="normal">d</mml:mi><mml:msub><mml:mi mathvariant="italic">σ</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">R</mml:mi></mml:msub></mml:mrow></mml:msub><mml:mo>(</mml:mo><mml:mi mathvariant="italic">π</mml:mi><mml:mo>)</mml:mo></mml:mrow><mml:mrow><mml:mi mathvariant="normal">d</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi></mml:mrow></mml:mfrac></mml:mstyle></mml:mrow></mml:mtd></mml:mtr><mml:mlabeledtr id="Ch1.E2"><mml:mtd/><mml:mtd><mml:mstyle displaystyle="true" class="stylechange"/></mml:mtd><mml:mtd><mml:mrow><mml:mstyle class="stylechange" displaystyle="true"/><?xmltex \hack{\hbox\bgroup\fontsize{8.2}{8.2}\selectfont$\displaystyle}?><?xmltex \hack{\hspace{5mm}}?><mml:mo>⋅</mml:mo><mml:mi>exp⁡</mml:mi><mml:mfenced open="{" close="}"><mml:mrow><mml:mo>-</mml:mo><mml:munderover><mml:mo movablelimits="false">∫</mml:mo><mml:mn mathvariant="normal">0</mml:mn><mml:mi>z</mml:mi></mml:munderover><mml:mfenced open="[" close="]"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">mol</mml:mi></mml:msubsup><mml:mfenced close=")" open="("><mml:mrow><mml:msup><mml:mi>z</mml:mi><mml:mo>′</mml:mo></mml:msup></mml:mrow></mml:mfenced><mml:mo>+</mml:mo><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup><mml:mfenced open="(" close=")"><mml:mrow><mml:msup><mml:mi>z</mml:mi><mml:mo>′</mml:mo></mml:msup></mml:mrow></mml:mfenced><mml:mo>+</mml:mo><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">R</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">mol</mml:mi></mml:msubsup><mml:mfenced open="(" close=")"><mml:mrow><mml:msup><mml:mi>z</mml:mi><mml:mo>′</mml:mo></mml:msup></mml:mrow></mml:mfenced><mml:mo>+</mml:mo><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">R</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup><mml:mfenced close=")" open="("><mml:mrow><mml:msup><mml:mi>z</mml:mi><mml:mo>′</mml:mo></mml:msup></mml:mrow></mml:mfenced></mml:mrow></mml:mfenced><mml:mo>⋅</mml:mo><mml:mi mathvariant="normal">d</mml:mi><mml:mi>z</mml:mi><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:mrow></mml:mfenced><?xmltex \hack{$\egroup}?><mml:mo>,</mml:mo></mml:mrow></mml:mtd></mml:mlabeledtr></mml:mtable></mml:math></disp-formula>

            where <inline-formula><mml:math id="M57" display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M58" display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">R</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> designate the emitted
wavelength (<inline-formula><mml:math id="M59" display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub><mml:mo>=</mml:mo><mml:mn mathvariant="normal">354.67</mml:mn></mml:mrow></mml:math></inline-formula> nm) and the first Stokes
vibrational <inline-formula><mml:math id="M60" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman wavelength (<inline-formula><mml:math id="M61" display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">R</mml:mi></mml:msub><mml:mo>=</mml:mo><mml:mn mathvariant="normal">386.63</mml:mn></mml:mrow></mml:math></inline-formula> nm),
respectively. The instrumental constant <inline-formula><mml:math id="M62" display="inline"><mml:mrow><mml:msub><mml:mi>K</mml:mi><mml:mi mathvariant="italic">λ</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> contains all
altitude-independent system parameters. <inline-formula><mml:math id="M63" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">R</mml:mi></mml:msub></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> is the nitrogen
molecule number density, <inline-formula><mml:math id="M64" display="inline"><mml:mrow><mml:mi mathvariant="normal">d</mml:mi><mml:msub><mml:mi mathvariant="italic">σ</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">R</mml:mi></mml:msub><mml:mo>(</mml:mo><mml:mi mathvariant="italic">π</mml:mi><mml:mo>)</mml:mo></mml:mrow></mml:msub><mml:mo>/</mml:mo><mml:mi mathvariant="normal">d</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi></mml:mrow></mml:math></inline-formula> is the range-independent differential Raman cross
section for the backward direction. <inline-formula><mml:math id="M65" display="inline"><mml:mi mathvariant="italic">α</mml:mi></mml:math></inline-formula> and <inline-formula><mml:math id="M66" display="inline"><mml:mi mathvariant="italic">β</mml:mi></mml:math></inline-formula> are the molecular
(mol) or aerosol (aer) extinction and backscatter
coefficients, respectively. The molecular extinction (<inline-formula><mml:math id="M67" display="inline"><mml:mrow><mml:msup><mml:mi mathvariant="italic">α</mml:mi><mml:mi mathvariant="normal">mol</mml:mi></mml:msup></mml:mrow></mml:math></inline-formula>) and
backscatter (<inline-formula><mml:math id="M68" display="inline"><mml:mrow><mml:msup><mml:mi mathvariant="italic">β</mml:mi><mml:mi mathvariant="normal">mol</mml:mi></mml:msup></mml:mrow></mml:math></inline-formula>) coefficients can be calculated from
climatological air mass models or radiosonde measurements. They are
determined in this study with a polynomial approximation as in Nicolet (1984) using a reference atmospheric
density calculated from ancillary measurements (Chazette et al., 2010); <inline-formula><mml:math id="M69" display="inline"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">β</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">mol</mml:mi></mml:msubsup></mml:mrow></mml:math></inline-formula> is expressed
as <inline-formula><mml:math id="M70" display="inline"><mml:mrow><mml:mn mathvariant="normal">3</mml:mn><mml:msub><mml:mi>k</mml:mi><mml:mi>f</mml:mi></mml:msub><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">mol</mml:mi></mml:msubsup><mml:mo>/</mml:mo><mml:mn mathvariant="normal">8</mml:mn><mml:mi mathvariant="italic">π</mml:mi></mml:mrow></mml:math></inline-formula>, with the King factor of air <inline-formula><mml:math id="M71" display="inline"><mml:mrow><mml:msub><mml:mi>k</mml:mi><mml:mi>f</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>
(King, 1923). The aerosol extinction (<inline-formula><mml:math id="M72" display="inline"><mml:mrow><mml:msup><mml:mi mathvariant="italic">α</mml:mi><mml:mi mathvariant="normal">aer</mml:mi></mml:msup></mml:mrow></mml:math></inline-formula>) is
assumed to be proportional to <inline-formula><mml:math id="M73" display="inline"><mml:mrow><mml:msup><mml:mi mathvariant="italic">λ</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mi mathvariant="italic">Å</mml:mi></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>, where the
Ångström exponent Å (Ångström, 1964) is considered to be a
constant depending on the aerosol nature. This value can be obtained from
external data such as a sun photometer (Dubovik et al., 2002).</p>
      <p id="d1e1501">The aerosol optical thickness (AOT) between two altitudes <inline-formula><mml:math id="M74" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mi>i</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M75" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mi>j</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>
at the wavelength <inline-formula><mml:math id="M76" display="inline"><mml:mi mathvariant="italic">λ</mml:mi></mml:math></inline-formula> is defined as the integration of the aerosol
extinction coefficient (AEC) on the altitude range [<inline-formula><mml:math id="M77" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mi>i</mml:mi></mml:msub><mml:mo>,</mml:mo><mml:msub><mml:mi>z</mml:mi><mml:mi>j</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>]
<inline-formula><mml:math id="M78" display="inline"><mml:mrow><mml:mfenced close=")" open="("><mml:mrow><mml:msubsup><mml:mo>∫</mml:mo><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mi mathvariant="normal">i</mml:mi></mml:msub></mml:mrow><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mi mathvariant="normal">j</mml:mi></mml:msub></mml:mrow></mml:msubsup><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup><mml:mfenced close=")" open="("><mml:mrow><mml:mi>z</mml:mi><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:mrow></mml:mfenced><mml:mo>⋅</mml:mo><mml:mi mathvariant="normal">d</mml:mi><mml:msup><mml:mi>z</mml:mi><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:msup></mml:mrow></mml:mfenced></mml:mrow></mml:math></inline-formula> and can be derived directly using
the Raman channel signal from Eq. (2) (Royer et al., 2011). For a chosen
reference altitude (<inline-formula><mml:math id="M79" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>), the aerosol backscatter coefficient (ABC) at
altitude <inline-formula><mml:math id="M80" display="inline"><mml:mi>z</mml:mi></mml:math></inline-formula> can be derived using either the ratio of the elastic signals,
which is corrected from the molecular extinction contribution (Royer et al., 2011), or the ratio
of the elastic and the Raman backscattered signals (Ansmann et al., 1992; Whiteman
et al., 1992). An assumption about the reference value <inline-formula><mml:math id="M81" display="inline"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">β</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup><mml:mfenced open="(" close=")"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mi mathvariant="normal">ref</mml:mi></mml:msub></mml:mrow></mml:mfenced></mml:mrow></mml:math></inline-formula> is needed. Usually, the reference altitude
<inline-formula><mml:math id="M82" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mi mathvariant="normal">ref</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> is chosen in a Rayleigh zone where the aerosol load is
negligible;
i.e. <inline-formula><mml:math id="M83" display="inline"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">β</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">mol</mml:mi></mml:msubsup><mml:mfenced open="(" close=")"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mi mathvariant="normal">ref</mml:mi></mml:msub></mml:mrow></mml:mfenced><mml:mo>≫</mml:mo><mml:msubsup><mml:mi mathvariant="italic">β</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup><mml:mfenced open="(" close=")"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mi mathvariant="normal">ref</mml:mi></mml:msub></mml:mrow></mml:mfenced></mml:mrow></mml:math></inline-formula>.</p>
      <p id="d1e1702">For lidar systems with co- and cross-polarized channels, the volumetric
depolarization ratio (VDR) and linear particle depolarization ratio (PDR) can
be derived following the procedure described in Chazette et al. (2012). As
the PDR is a physical parameter retrieved with a high uncertainty when there
are few aerosol particles, its calculation in this study is only performed
for layers where the AEC is at least 0.01 km<inline-formula><mml:math id="M84" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>.</p>
      <p id="d1e1717">The lidar ratio (LR, also called particle extinction-to-backscatter
ratio) is determined by the ratio of two unknowns, <inline-formula><mml:math id="M85" display="inline"><mml:mrow><mml:msup><mml:mi mathvariant="italic">α</mml:mi><mml:mi mathvariant="normal">aer</mml:mi></mml:msup></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M86" display="inline"><mml:mrow><mml:msup><mml:mi mathvariant="italic">β</mml:mi><mml:mi mathvariant="normal">aer</mml:mi></mml:msup></mml:mrow></mml:math></inline-formula>, of the lidar equation. The LR depends on the complex refractive
index, size, shape, and orientation of aerosols (Sasano et al., 1985). The main Raman inversion
methods, yielding retrievals of LR, can be classified as three types of
algorithms:
<list list-type="order"><list-item>
      <p id="d1e1744"><italic>Single-layer AOT constrained Klett algorithm</italic>
(Ansmann
et al., 1990; Chazette et al., 2010; Dieudonné et al., 2015). The main
error sources are well known and are mainly due to the vertical heterogeneity
of the aerosol layers. The altitude-independent LR can be poorly
representative of the actual LR profile, especially in the presence of multiple
scattering layers composed of different types of aerosol (e.g. dust,
pollution, and sea salt aerosols; Chazette et al.,
2016). According to the sensitivity study carried out by Royer et al. (2011), for the same
<inline-formula><mml:math id="M87" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman lidar presented in Sect. 2.2, the relative error on the
altitude-independent LR ranges between 4 % and 18 % (16 % to 100 %)
during night-time (daytime) for AOT values ranging from 0.1 to 0.5. Note
that Ansmann (2006) found a difference in the
altitude-independent LR of up to 20 % between the single-layer Klett
solutions from spaceborne and ground-based lidar.</p></list-item><list-item>
      <p id="d1e1761"><italic>Standard Raman inversion</italic>. Mathematically, the AEC can be
retrieved directly by differentiating the Raman-derived AOT profile. The
distinction between algorithms of standard Raman inversion mainly concerns
data-smoothing techniques and the evaluation of a numerical derivative
(Pappalardo et
al., 2004; Whiteman, 1999). Pappalardo et al. (2004) reported on the inter-comparison of
several standard Raman inversions in the EARLINET network, which shows a mean
deviation of LR within 20 % in the ABL, and within 15 % for a lofted
aerosol layer.</p></list-item><list-item>
      <p id="d1e1767"><italic>Raman-constrained regularization</italic>. The regularization method
most commonly used for Raman lidar processing is the Tikhonov regularization
method (Royer et
al., 2011; Shcherbakov, 2007). Shcherbakov (2007)
reports a regularized algorithm (based on theory in Tikhonov and Arsenin,
1978), which improved the quality of the Raman lidar data processing
compared to the standard Raman inversion. The retrieved LR profile has
reduced root-mean-square errors but does not follow strong variations of the
actual LR, especially at the boundaries between layers, and its smoothness
gives a false impression of precision in zones with low signal-to-noise
ratio (SNR). The Tikhonov approach is inherently an optimal estimator for
the ABC, and not for the LR.</p></list-item></list></p>
</sec>
<?pagebreak page6529?><sec id="Ch1.S3.SS2">
  <title>The top-down aerosol optical thickness matching (TDAM) algorithm</title>
      <p id="d1e1778">All the above approaches are based on the assumption that the aerosol load in
the reference zone is negligible. However, because of clouds or thick aerosol
loads or strong daylight background limiting the maximum usable range of the
backscatter signals, or the presence of aerosols high in the free
troposphere, there are cases in which a pure Rayleigh reference zone cannot
be reached or does not exist (e.g. profiles with clouds or dust plumes above
the ABL in this study). Moreover, we have discussed the limitations of
regularized approaches that we cannot retrieve detailed information due to a
vertical resolution unsuitable for a thin aerosol layer (e.g. the warehouse
fire smoke aerosol layer (SAL) in this study). For ground-based <inline-formula><mml:math id="M88" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman
lidar, a new algorithm has been developed to solve these problems and will be
described in this section. In the following, the parameters without
subscripts relate to the emitted wavelength (<inline-formula><mml:math id="M89" display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>).</p>
<sec id="Ch1.S3.SS2.SSS1">
  <title>Reference zone and related optical parameters</title>
      <?pagebreak page6530?><p id="d1e1808">The lidar profile is shared in several atmospheric layers indexed from
<inline-formula><mml:math id="M90" display="inline"><mml:mrow><mml:mi>i</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:math></inline-formula> to <inline-formula><mml:math id="M91" display="inline"><mml:mi>n</mml:mi></mml:math></inline-formula>, with the lowest index (<inline-formula><mml:math id="M92" display="inline"><mml:mrow><mml:mi>i</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:math></inline-formula>) corresponding to the maximum usable
range of the signal and <inline-formula><mml:math id="M93" display="inline"><mml:mi>i</mml:mi></mml:math></inline-formula> increasing downwards to the ground level. Note
that the layers are not necessarily equidistant. Whether the Raman channel
reaches a pure Rayleigh zone or not, we choose the reference zone in the
altitude range of [<inline-formula><mml:math id="M94" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>, <inline-formula><mml:math id="M95" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>], named as the first altitude interval,
in which the AEC is considered as constant against the altitude
(Fig. 4). Figure 5 gives
an illustration of the method, using an actual lidar profile acquired during
the fire smoke event (at 21:20 UTC). To estimate the AEC in the reference
zone, due to a weak SNR, a least mean square approach is applied on the
normalized <inline-formula><mml:math id="M96" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman lidar signal, after correction of the molecular
contributions:
              <disp-formula id="Ch1.E3" content-type="numbered"><mml:math id="M97" display="block"><mml:mrow><?xmltex \hack{\hbox\bgroup\fontsize{7.8}{7.8}\selectfont$\displaystyle}?><mml:msub><mml:mi mathvariant="normal">R</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">R</mml:mi></mml:msub></mml:mrow></mml:msub><mml:mfenced close=")" open="("><mml:mi>z</mml:mi></mml:mfenced><mml:mo>=</mml:mo><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:msub><mml:mi>S</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">R</mml:mi></mml:msub></mml:mrow></mml:msub><mml:mfenced open="(" close=")"><mml:mi>z</mml:mi></mml:mfenced><mml:mo>⋅</mml:mo><mml:msub><mml:mi>N</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">R</mml:mi></mml:msub></mml:mrow></mml:msub><mml:mfenced close=")" open="("><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:mfenced><mml:mo>⋅</mml:mo><mml:mi>exp⁡</mml:mi><mml:mfenced open="{" close="}"><mml:mrow><mml:msubsup><mml:mo>∫</mml:mo><mml:mn mathvariant="normal">0</mml:mn><mml:mi>z</mml:mi></mml:msubsup><mml:mfenced open="[" close="]"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">mol</mml:mi></mml:msubsup><mml:mfenced close=")" open="("><mml:mrow><mml:msup><mml:mi>z</mml:mi><mml:mo>′</mml:mo></mml:msup></mml:mrow></mml:mfenced><mml:mo>+</mml:mo><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">R</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">mol</mml:mi></mml:msubsup><mml:mfenced close=")" open="("><mml:mrow><mml:msup><mml:mi>z</mml:mi><mml:mo>′</mml:mo></mml:msup></mml:mrow></mml:mfenced></mml:mrow></mml:mfenced><mml:mo>⋅</mml:mo><mml:mi mathvariant="normal">d</mml:mi><mml:mi>z</mml:mi><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:mrow></mml:mfenced></mml:mrow><mml:mrow><mml:msub><mml:mi>S</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">R</mml:mi></mml:msub></mml:mrow></mml:msub><mml:mfenced close=")" open="("><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:mfenced><mml:mo>⋅</mml:mo><mml:msub><mml:mi>N</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">R</mml:mi></mml:msub></mml:mrow></mml:msub><mml:mfenced close=")" open="("><mml:mi>z</mml:mi></mml:mfenced><mml:mo>⋅</mml:mo><mml:mi>exp⁡</mml:mi><mml:mfenced open="{" close="}"><mml:mrow><mml:msubsup><mml:mo>∫</mml:mo><mml:mn mathvariant="normal">0</mml:mn><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:msubsup><mml:mfenced open="[" close="]"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">mol</mml:mi></mml:msubsup><mml:mfenced close=")" open="("><mml:mrow><mml:msup><mml:mi>z</mml:mi><mml:mo>′</mml:mo></mml:msup></mml:mrow></mml:mfenced><mml:mo>+</mml:mo><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">R</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">mol</mml:mi></mml:msubsup><mml:mfenced open="(" close=")"><mml:mrow><mml:msup><mml:mi>z</mml:mi><mml:mo>′</mml:mo></mml:msup></mml:mrow></mml:mfenced></mml:mrow></mml:mfenced><mml:mo>⋅</mml:mo><mml:mi mathvariant="normal">d</mml:mi><mml:mi>z</mml:mi><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:mrow></mml:mfenced></mml:mrow></mml:mfrac></mml:mstyle><mml:mo>,</mml:mo><?xmltex \hack{$\egroup}?></mml:mrow></mml:math></disp-formula>
            as proposed by Chazette et al. (2016). This ratio
is proportional to the aerosol transmission in the first altitude
interval, where the AEC is considered as constant, so that

                  <disp-formula specific-use="align" content-type="numbered"><mml:math id="M98" display="block"><mml:mtable displaystyle="true"><mml:mtr><mml:mtd><mml:mrow><mml:mstyle displaystyle="true" class="stylechange"/><mml:msubsup><mml:mi mathvariant="normal">R</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">R</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">E</mml:mi></mml:msubsup><mml:mfenced open="(" close=")"><mml:mi>z</mml:mi></mml:mfenced></mml:mrow></mml:mtd><mml:mtd><mml:mrow><mml:mstyle displaystyle="true" class="stylechange"/><mml:mo>=</mml:mo><mml:mi>exp⁡</mml:mi><mml:mfenced open="{" close="}"><mml:mrow><mml:mo>-</mml:mo><mml:mfenced close="]" open="["><mml:mrow><mml:mn mathvariant="normal">1</mml:mn><mml:mo>+</mml:mo><mml:msup><mml:mfenced close=")" open="("><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi>N</mml:mi></mml:msub></mml:mrow><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow></mml:mfrac></mml:mstyle></mml:mfenced><mml:mrow><mml:mo>-</mml:mo><mml:mi mathvariant="normal">Å</mml:mi></mml:mrow></mml:msup></mml:mrow></mml:mfenced><mml:mo>⋅</mml:mo><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mi mathvariant="normal">ref</mml:mi><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup><mml:mo>⋅</mml:mo><mml:mfenced close=")" open="("><mml:mrow><mml:mi>z</mml:mi><mml:mo>-</mml:mo><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:mfenced></mml:mrow></mml:mfenced></mml:mrow></mml:mtd></mml:mtr><mml:mlabeledtr id="Ch1.E4"><mml:mtd/><mml:mtd><mml:mstyle displaystyle="true" class="stylechange"/></mml:mtd><mml:mtd><mml:mrow><mml:mstyle displaystyle="true" class="stylechange"/><mml:mi>z</mml:mi><mml:mo>∈</mml:mo><mml:mfenced close="]" open="["><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub><mml:mo>,</mml:mo><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:mfenced><mml:mo>.</mml:mo></mml:mrow></mml:mtd></mml:mlabeledtr></mml:mtable></mml:math></disp-formula>

              Hence, the estimator <inline-formula><mml:math id="M99" display="inline"><mml:mover accent="true"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mi mathvariant="normal">ref</mml:mi><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup></mml:mrow><mml:mo mathvariant="normal" stretchy="true">^</mml:mo></mml:mover></mml:math></inline-formula> of the AEC at the reference
altitude is derived from
              <disp-formula id="Ch1.E5" content-type="numbered"><mml:math id="M100" display="block"><mml:mrow><mml:mover accent="true"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mi mathvariant="normal">ref</mml:mi><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup></mml:mrow><mml:mo stretchy="true" mathvariant="normal">^</mml:mo></mml:mover><mml:mo>=</mml:mo><mml:msup><mml:mfenced close="∥" open="∥"><mml:mrow><mml:msub><mml:mi mathvariant="normal">R</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">R</mml:mi></mml:msub></mml:mrow></mml:msub><mml:mfenced open="(" close=")"><mml:mi>z</mml:mi></mml:mfenced><mml:mo>-</mml:mo><mml:msubsup><mml:mi mathvariant="normal">R</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">R</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">E</mml:mi></mml:msubsup><mml:mfenced open="(" close=")"><mml:mi>z</mml:mi></mml:mfenced></mml:mrow></mml:mfenced><mml:mn mathvariant="normal">2</mml:mn></mml:msup><mml:mo>,</mml:mo><mml:mi>z</mml:mi><mml:mo>∈</mml:mo><mml:mfenced open="[" close="]"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub><mml:mo>,</mml:mo><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:mfenced><mml:mo>.</mml:mo></mml:mrow></mml:math></disp-formula>
            The computation of the LR in the first altitude interval (LR<inline-formula><mml:math id="M101" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:math></inline-formula>) needs a
second altitude interval [<inline-formula><mml:math id="M102" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>, <inline-formula><mml:math id="M103" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>], with <inline-formula><mml:math id="M104" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> &lt; <inline-formula><mml:math id="M105" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>. The altitude <inline-formula><mml:math id="M106" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> is chosen to verify the following constraint on
the partial AOT (PAOT) between <inline-formula><mml:math id="M107" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M108" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>:
              <disp-formula id="Ch1.E6" content-type="numbered"><mml:math id="M109" display="block"><mml:mrow><mml:mi mathvariant="normal">AOT</mml:mi><mml:mfenced open="(" close=")"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub><mml:mo>,</mml:mo><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:mfenced><mml:mo>≥</mml:mo><mml:mn mathvariant="normal">0.05</mml:mn><mml:mo>.</mml:mo></mml:mrow></mml:math></disp-formula>
            The PAOT is derived from the Raman channel profile. The ABC at the reference
altitude is given by
              <disp-formula id="Ch1.E7" content-type="numbered"><mml:math id="M110" display="block"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">β</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup><mml:mfenced close=")" open="("><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mi mathvariant="normal">ref</mml:mi></mml:msub></mml:mrow></mml:mfenced><mml:mo>=</mml:mo><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mn mathvariant="normal">1</mml:mn><mml:mrow><mml:msub><mml:mi mathvariant="normal">LR</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow></mml:mfrac></mml:mstyle><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:mi mathvariant="normal">AOT</mml:mi><mml:mfenced close=")" open="("><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub><mml:mo>,</mml:mo><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:mfenced></mml:mrow><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub><mml:mo>-</mml:mo><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow></mml:mfrac></mml:mstyle><mml:mo>,</mml:mo><mml:mspace linebreak="nobreak" width="0.25em"/><mml:mtext>with</mml:mtext><mml:mspace width="0.25em" linebreak="nobreak"/><mml:msub><mml:mi>z</mml:mi><mml:mi mathvariant="normal">ref</mml:mi></mml:msub><mml:mo>=</mml:mo><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub><mml:mo>+</mml:mo><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow><mml:mn mathvariant="normal">2</mml:mn></mml:mfrac></mml:mstyle><mml:mo>.</mml:mo></mml:mrow></mml:math></disp-formula>
            It is used as an initial value to constrain the Klett inversion (e.g. Eq. 12
in Royer et al., 2011). We assume that LR<inline-formula><mml:math id="M111" display="inline"><mml:mrow><mml:msub><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msub><mml:mo>=</mml:mo><mml:msub><mml:mi mathvariant="normal">LR</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> between <inline-formula><mml:math id="M112" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> and
<inline-formula><mml:math id="M113" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>. Hence, an analytical solution exists and is given by

                  <disp-formula specific-use="align" content-type="numbered"><mml:math id="M114" display="block"><mml:mtable displaystyle="true"><mml:mtr><mml:mtd><mml:mstyle displaystyle="true" class="stylechange"/></mml:mtd><mml:mtd><mml:mrow><mml:mstyle displaystyle="true" class="stylechange"/><mml:mover accent="true"><mml:mrow><mml:msub><mml:mi mathvariant="normal">LR</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow><mml:mo stretchy="true" mathvariant="normal">^</mml:mo></mml:mover><mml:mo>=</mml:mo><mml:mover accent="true"><mml:mrow><mml:msub><mml:mi mathvariant="normal">LR</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow><mml:mo mathvariant="normal" stretchy="true">^</mml:mo></mml:mover><mml:mo>=</mml:mo></mml:mrow></mml:mtd></mml:mtr><mml:mlabeledtr id="Ch1.E8"><mml:mtd/><mml:mtd><mml:mstyle class="stylechange" displaystyle="true"/></mml:mtd><mml:mtd><mml:mrow><?xmltex \hack{\hspace{5mm}}?><?xmltex \hack{\hbox\bgroup\fontsize{8.5}{8.5}\selectfont$\displaystyle}?><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:msub><mml:mi mathvariant="normal">R</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow></mml:msub><mml:mfenced open="(" close=")"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:mfenced><mml:mo>⋅</mml:mo><mml:mstyle displaystyle="false"><mml:mfrac style="text"><mml:mrow><mml:mi mathvariant="normal">AOT</mml:mi><mml:mfenced close=")" open="("><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub><mml:mo>,</mml:mo><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:mfenced></mml:mrow><mml:mrow><mml:mfenced open="(" close=")"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub><mml:mo>-</mml:mo><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow></mml:mfenced></mml:mrow></mml:mfrac></mml:mstyle><mml:mo>⋅</mml:mo><mml:mi>exp⁡</mml:mi><mml:mfenced close="]" open="["><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">2</mml:mn><mml:mo>⋅</mml:mo><mml:mi mathvariant="normal">AOT</mml:mi><mml:mfenced close=")" open="("><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub><mml:mo>,</mml:mo><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:mfenced></mml:mrow></mml:mfenced><mml:mo>-</mml:mo><mml:mstyle displaystyle="false"><mml:mfrac style="text"><mml:mrow><mml:mi mathvariant="normal">AOT</mml:mi><mml:mfenced open="(" close=")"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub><mml:mo>,</mml:mo><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:mfenced></mml:mrow><mml:mrow><mml:mfenced close=")" open="("><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub><mml:mo>-</mml:mo><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:mfenced></mml:mrow></mml:mfrac></mml:mstyle></mml:mrow><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">β</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">mol</mml:mi></mml:msubsup><mml:mfenced close=")" open="("><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:mfenced><mml:mo>-</mml:mo><mml:msub><mml:mi mathvariant="normal">R</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow></mml:msub><mml:mfenced close=")" open="("><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:mfenced><mml:mo>⋅</mml:mo><mml:msubsup><mml:mi mathvariant="italic">β</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">mol</mml:mi></mml:msubsup><mml:mfenced close=")" open="("><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mi mathvariant="normal">ref</mml:mi></mml:msub></mml:mrow></mml:mfenced><mml:mo>⋅</mml:mo><mml:mi>exp⁡</mml:mi><mml:mfenced close="]" open="["><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">2</mml:mn><mml:mo>⋅</mml:mo><mml:mi mathvariant="normal">AOT</mml:mi><mml:mfenced close=")" open="("><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub><mml:mo>,</mml:mo><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:mfenced></mml:mrow></mml:mfenced></mml:mrow></mml:mfrac></mml:mstyle><?xmltex \hack{$\egroup}?><mml:mo>,</mml:mo></mml:mrow></mml:mtd></mml:mlabeledtr></mml:mtable></mml:math></disp-formula>

              where <inline-formula><mml:math id="M115" display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="normal">R</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> is the ratio of elastic lidar signal after
correction of the molecular transmission:
              <disp-formula id="Ch1.E9" content-type="numbered"><mml:math id="M116" display="block"><mml:mrow><mml:msub><mml:mi mathvariant="normal">R</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow></mml:msub><mml:mfenced close=")" open="("><mml:mi mathvariant="normal">z</mml:mi></mml:mfenced><mml:mo>=</mml:mo><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:msub><mml:mi>S</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow></mml:msub><mml:mfenced open="(" close=")"><mml:mi>z</mml:mi></mml:mfenced><mml:mo>⋅</mml:mo><mml:mi>exp⁡</mml:mi><mml:mfenced close="}" open="{"><mml:mrow><mml:mn mathvariant="normal">2</mml:mn><mml:msubsup><mml:mo>∫</mml:mo><mml:mn mathvariant="normal">0</mml:mn><mml:mi>z</mml:mi></mml:msubsup><mml:mfenced open="[" close="]"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">mol</mml:mi></mml:msubsup><mml:mfenced close=")" open="("><mml:mrow><mml:mi>z</mml:mi><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:mrow></mml:mfenced></mml:mrow></mml:mfenced><mml:mo>⋅</mml:mo><mml:mi mathvariant="normal">d</mml:mi><mml:mi>z</mml:mi><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:mrow></mml:mfenced></mml:mrow><mml:mrow><mml:msub><mml:mi>S</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow></mml:msub><mml:mfenced open="(" close=")"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:mfenced><mml:mo>⋅</mml:mo><mml:mi>exp⁡</mml:mi><mml:mfenced close="}" open="{"><mml:mrow><mml:mn mathvariant="normal">2</mml:mn><mml:msubsup><mml:mo>∫</mml:mo><mml:mn mathvariant="normal">0</mml:mn><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:msubsup><mml:mfenced close="]" open="["><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">mol</mml:mi></mml:msubsup><mml:mfenced close=")" open="("><mml:mrow><mml:mi>z</mml:mi><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:mrow></mml:mfenced></mml:mrow></mml:mfenced><mml:mo>⋅</mml:mo><mml:mi mathvariant="normal">d</mml:mi><mml:mi>z</mml:mi><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:mrow></mml:mfenced></mml:mrow></mml:mfrac></mml:mstyle><mml:mo>.</mml:mo></mml:mrow></mml:math></disp-formula>
            If the solution does not converge to plausible LR values (between 20 and 120 sr), the second altitude interval is enlarged by one resolution step of
the lidar profiles, and so on.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F4"><caption><p id="d1e2975">Diagram of the <inline-formula><mml:math id="M117" display="inline"><mml:mi>i</mml:mi></mml:math></inline-formula>th (<inline-formula><mml:math id="M118" display="inline"><mml:mrow><mml:mi>i</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:math></inline-formula>, 2, …, <inline-formula><mml:math id="M119" display="inline"><mml:mi>n</mml:mi></mml:math></inline-formula>) altitude interval for the
altitude range [<inline-formula><mml:math id="M120" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mi>i</mml:mi></mml:msub><mml:mo>,</mml:mo><mml:msub><mml:mi>z</mml:mi><mml:mrow><mml:mi>i</mml:mi><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>] using the TDAM (top-down aerosol optical
thickness matching) algorithm.</p></caption>
            <?xmltex \igopts{width=236.157874pt}?><graphic xlink:href="https://amt.copernicus.org/articles/11/6525/2018/amt-11-6525-2018-f04.png"/>

          </fig>

      <?xmltex \floatpos{t}?><fig id="Ch1.F5" specific-use="star"><caption><p id="d1e3035">Example for the demonstration of the TDAM (top-down aerosol optical
thickness matching) algorithm, which is an actual lidar measurement at
<inline-formula><mml:math id="M121" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 21:20 UTC on 17 April (cf. Fig. 3). <bold>(a)</bold> Range-corrected
elastic signal (black) with fitted molecular elastic signal (blue).
<bold>(b)</bold> Range-corrected Raman signal (black) with fitted molecular Raman
signal (blue). <bold>(c)</bold> Raman-derived AOT profile (black) with retrieved
AOT profile using TDAM (red). Altitudes determining layers are shown by
dotted lines, from which we can find the first altitude interval [<inline-formula><mml:math id="M122" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>,
<inline-formula><mml:math id="M123" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>], the second altitude interval [<inline-formula><mml:math id="M124" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>, <inline-formula><mml:math id="M125" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>], and the <inline-formula><mml:math id="M126" display="inline"><mml:mi>i</mml:mi></mml:math></inline-formula>th
altitude interval [<inline-formula><mml:math id="M127" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mrow><mml:mi>i</mml:mi><mml:mo>+</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>, <inline-formula><mml:math id="M128" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mi>i</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>]. The two heavy aerosol load layers (HALLs)
are also shown. <bold>(d)</bold> Retrieved LR profile using the TDAM algorithm.</p></caption>
            <?xmltex \igopts{width=398.338583pt}?><graphic xlink:href="https://amt.copernicus.org/articles/11/6525/2018/amt-11-6525-2018-f05.png"/>

          </fig>

</sec>
<sec id="Ch1.S3.SS2.SSS2">
  <?xmltex \opttitle{Profiles of the aerosol optical parameter derived from the {$\chem{N_{{2}}}$} Raman
lidar}?><title>Profiles of the aerosol optical parameter derived from the <inline-formula><mml:math id="M129" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman
lidar</title>
      <p id="d1e3161">At this stage, the goal is to estimate profiles of <inline-formula><mml:math id="M130" display="inline"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup><mml:mfenced close=")" open="("><mml:mi>z</mml:mi></mml:mfenced></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M131" display="inline"><mml:mrow><mml:mi mathvariant="normal">LR</mml:mi><mml:mfenced open="(" close=")"><mml:mi>z</mml:mi></mml:mfenced></mml:mrow></mml:math></inline-formula> using the LR and AEC
previously retrieved at the reference altitude. Below the first and
second altitude intervals, we identify <inline-formula><mml:math id="M132" display="inline"><mml:mrow><mml:mi>n</mml:mi><mml:mo>-</mml:mo><mml:mn mathvariant="normal">2</mml:mn></mml:mrow></mml:math></inline-formula> successive homogeneous layers (see
Fig. 4), and the LR inside each layer is assumed
to be altitude-independent. Different methods can be used for this step. The
easiest way is using a constant altitude interval (e.g. one LR value per
1 km). The altitude interval can also be defined considering a minimal value
of PAOT (e.g. 0.1) to be reached in each interval. Indeed, the LR is
meaningless for layers where the aerosol load is too small; this argues for
sufficiently high PAOTs in each altitude range. Note that a thin layer <inline-formula><mml:math id="M133" display="inline"><mml:mi>i</mml:mi></mml:math></inline-formula> of
strong PAOT can also significantly bias the retrieval of the LR value for
the remaining <inline-formula><mml:math id="M134" display="inline"><mml:mrow><mml:mi>n</mml:mi><mml:mo>-</mml:mo><mml:mi>i</mml:mi></mml:mrow></mml:math></inline-formula> layers.</p>
      <p id="d1e3226">In this study, a more evolved method is used to define layers. Firstly, the
existence of a “heavy aerosol load layer” (HALL) is checked using the
slope of the range-corrected elastic signal, which has a better SNR than the
Raman signal. In our example in Fig. 5, we identify two homogeneous aerosol layers, the first one between <inline-formula><mml:math id="M135" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M136" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> and
the second one between <inline-formula><mml:math id="M137" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">5</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M138" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mn mathvariant="normal">6</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>, as HALLs. Furthermore, we
considered the ABL as one homogeneous layer. Secondly, we choose a constant
AOT increment to determine the other homogeneous layers
(Fig. 5c). In this study we select a value of
0.05 as a compromise between the final vertical sampling of LR and the
computation time. Once the different layers, <inline-formula><mml:math id="M139" display="inline"><mml:mrow><mml:mi>i</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">3</mml:mn><mml:mo>,</mml:mo><mml:mi mathvariant="normal">…</mml:mi><mml:mo>,</mml:mo><mml:mi>n</mml:mi></mml:mrow></mml:math></inline-formula> are defined, the
inversion procedure starts.</p>
      <p id="d1e3293">The LR in the <inline-formula><mml:math id="M140" display="inline"><mml:mi>i</mml:mi></mml:math></inline-formula>th altitude interval, LR<inline-formula><mml:math id="M141" display="inline"><mml:mrow><mml:msub><mml:mi/><mml:mi>i</mml:mi></mml:msub><mml:mo>=</mml:mo><mml:mi mathvariant="normal">LR</mml:mi></mml:mrow></mml:math></inline-formula> (<inline-formula><mml:math id="M142" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mi>i</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>, <inline-formula><mml:math id="M143" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mrow><mml:mi>i</mml:mi><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>), can be
derived following a procedure similar to the one presented in the previous
section (Eq. 8), using the layer PAOT, <inline-formula><mml:math id="M144" display="inline"><mml:mrow><mml:mi mathvariant="normal">AOT</mml:mi><mml:mfenced open="(" close=")"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mi>i</mml:mi></mml:msub><mml:mo>,</mml:mo><mml:msub><mml:mi>z</mml:mi><mml:mrow><mml:mi>i</mml:mi><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:mfenced></mml:mrow></mml:math></inline-formula>. A LR profile, keeping the estimated values
LR<inline-formula><mml:math id="M145" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:math></inline-formula>, …, LR<inline-formula><mml:math id="M146" display="inline"><mml:msub><mml:mi/><mml:mrow><mml:mi>i</mml:mi><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msub></mml:math></inline-formula> for the previous layers and testing for
LR<inline-formula><mml:math id="M147" display="inline"><mml:msub><mml:mi/><mml:mi>i</mml:mi></mml:msub></mml:math></inline-formula> in the new layer <inline-formula><mml:math id="M148" display="inline"><mml:mi>m</mml:mi></mml:math></inline-formula> values centred around LR<inline-formula><mml:math id="M149" display="inline"><mml:msub><mml:mi/><mml:mrow><mml:mi>i</mml:mi><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msub></mml:math></inline-formula>, is used for Klett
inversion at this step. The LR<inline-formula><mml:math id="M150" display="inline"><mml:msub><mml:mi/><mml:mi>i</mml:mi></mml:msub></mml:math></inline-formula> value best matching the Klett-derived
PAOT to the measured value is chosen. We find that iterating (up to three times)
with <inline-formula><mml:math id="M151" display="inline"><mml:mrow><mml:mi>m</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">7</mml:mn></mml:mrow></mml:math></inline-formula> values and finer increments until the PAOT is found within
10<inline-formula><mml:math id="M152" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">4</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> yields the best results in terms of precision and computation
time.</p>
      <p id="d1e3459">This procedure is repeated for all the altitude intervals until the ground
level is reached. The final estimate of the LR profile of the example
considered in Fig. 5 is shown in
Fig. 5d. Using the backward Klett method, we use
this LR profile and the range-corrected elastic signal to compute the AOT
profile (superimposed in red in Fig. 5c), which
matches the AOT retrieved from the <inline-formula><mml:math id="M153" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman channel well.</p>
      <p id="d1e3474">The TDAM method may be of advantage if the retrieved backscatter coefficient
profile indicates pronounced heterogeneities against altitude. It can be
used extensively, even for daytime inversions, if the Raman maximum range is
sufficient. However, this algorithm cannot be used to generate real-time
quick look plots because it is relatively time-consuming (<inline-formula><mml:math id="M154" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">45</mml:mn></mml:mrow></mml:math></inline-formula> s computation time per profile).</p>
</sec>
</sec>
<sec id="Ch1.S3.SS3">
  <title>Uncertainty sources</title>
      <p id="d1e3494">The uncertainties on aerosol optical properties retrieved from <inline-formula><mml:math id="M155" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman
lidar measurements are mainly (i) bias linked to the effective vertical
resolution, (ii) bias due to an inaccurate AEC in the reference zone, (iii) bias due to the assumed model of the molecular contribution, (iv) bias due to
the assumed Ångström exponent, and (v) random error associated with
the signal noise characterized by the SNR. The main uncertainties of the
TDAM method will be discussed in the following. Uncertainty sources are
assumed to be independent. Note that an error can also be introduced by
temporal<?pagebreak page6531?> averaging during varying atmospheric extinction and scattering
conditions, which will also be discussed in the next section for the
warehouse fire smoke case study.</p>
      <p id="d1e3508">An end-to-end simulator was developed for the error study of the TDAM method,
with the block diagram shown in Fig. 6. We developed a similar algorithm when
studying the uncertainty sources for a spaceborne lidar dedicated to forest
studies (Shang and Chazette, 2015). The input profiles of AEC and LR
(AEC<inline-formula><mml:math id="M156" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:math></inline-formula> and LR<inline-formula><mml:math id="M157" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:math></inline-formula>) can either be the ones retrieved from actual
measurements or simulated profiles. They are used to simulate the
backscattered lidar signals of both elastic
(<inline-formula><mml:math id="M158" display="inline"><mml:mover accent="true"><mml:mrow><mml:msub><mml:mi>S</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi mathvariant="normal">E</mml:mi></mml:msub></mml:mrow></mml:msub></mml:mrow><mml:mo mathvariant="normal">̃</mml:mo></mml:mover></mml:math></inline-formula>) and Raman
(<inline-formula><mml:math id="M159" display="inline"><mml:mover accent="true"><mml:mrow><mml:msub><mml:mi>S</mml:mi><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi>N</mml:mi></mml:msub></mml:mrow></mml:msub></mml:mrow><mml:mo mathvariant="normal">̃</mml:mo></mml:mover></mml:math></inline-formula>) channels through the “direct model”. The
instrument parameters are adjusted using actual lidar signals. An atmospheric
molecular model is used to provide the molecular contributions. The
statistical error study is performed using a Monte Carlo approach as
described in Chazette et al. (2001). The main sources of noise were taken
into account considering normal statistical distributions, which are
introduced by a normal random generator. For each statistical simulation, we
used 100 draws, ensuring a normal distribution up to 1 standard deviation
away from the mean value of the parameters. Each statistical realization of
the lidar signals was then inverted by the “inverse model” to estimate the
aerosol optical parameters. The comparison between these estimators and the
initial values was then performed in the “comparison module” to retrieve
the bias and standard deviations of the AEC, AOT, and LR.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F6"><caption><p id="d1e3567">Block diagram of the end-to-end simulator. See text in Sect. 3.3.</p></caption>
          <?xmltex \igopts{width=236.157874pt}?><graphic xlink:href="https://amt.copernicus.org/articles/11/6525/2018/amt-11-6525-2018-f06.png"/>

        </fig>

<sec id="Ch1.S3.SS3.SSS1">
  <title>Systematic errors</title>
      <p id="d1e3581">Systematic errors are mainly associated with the estimated input parameters.
The uncertainty on the a priori knowledge of the vertical profile of the
molecular contribution, as determined from ancillary data, has been assessed
to be lower than 2 % as in Chazette et al. (2010) using a comparison
between several radiosoundings. The Ångström exponent
(Å) used in this study is 1.1. The Aerosol Robotic Network
(AERONET) Level 2.0 product from the Palaiseau station near the lidar station
(<uri>http://aeronet.gsfc.nasa.gov/</uri>, last access: 3 December 2018; Fig. 1) is considered, from which the
visible (440–675 nm) mean Å on 17 April is found to be
<inline-formula><mml:math id="M160" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">1.14</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.05</mml:mn></mml:mrow></mml:math></inline-formula>, representative of carbonaceous particles.
Note<?pagebreak page6532?> that the Ångström exponent for Paris background aerosols is
<inline-formula><mml:math id="M161" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">1.5</mml:mn></mml:mrow></mml:math></inline-formula> (Chazette and Royer, 2017). Chazette et al. (2014) report that the residual relative uncertainty on LR
due to Å <inline-formula><mml:math id="M162" display="inline"><mml:mo>±</mml:mo></mml:math></inline-formula> 0.05 was calculated to be less than 3 %.
The use of King factor <inline-formula><mml:math id="M163" display="inline"><mml:mrow><mml:msub><mml:mi>k</mml:mi><mml:mi>f</mml:mi></mml:msub><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:math></inline-formula> causes an overestimation of the
molecular volume backscatter coefficient of 1.5 % at 355 nm
(Collis and Russel, 1976). The error due to temporal
averaging is not discussed here as it depends substantially on the
atmospheric situation and should be studied separately for each study period.</p>
</sec>
<sec id="Ch1.S3.SS3.SSS2">
  <title>Bias linked to the effective vertical resolution and AEC at the reference
altitude</title>
      <p id="d1e3640">In this section, only simulated mean lidar signals are considered for the
assessment of the biases linked to the effective vertical resolution and to
the AEC at the reference altitude.</p>
      <p id="d1e3643">Firstly, we check the ability of the TDAM method to resolve two narrow and
well-separated structures in the aerosol extinction profile. A step function
proposed by Pappalardo et al. (2004) is used here to evaluate the effective
vertical resolution. We took into account seven pairs of AEC profiles with Dirac
peaks (the value is equal to zero everywhere except at the height of peaks),
which are separated by 4, 6, 8, 12, 18, 22, 26, and 30 points between two
peaks, respectively. In each case, the LR is set to be 40 for the top peak
and 80 for the bottom peak. Using the TDAM method, we retrieved the
<inline-formula><mml:math id="M164" display="inline"><mml:mover accent="true"><mml:mi mathvariant="normal">AEC</mml:mi><mml:mo mathvariant="normal">̃</mml:mo></mml:mover></mml:math></inline-formula> and <inline-formula><mml:math id="M165" display="inline"><mml:mover accent="true"><mml:mi mathvariant="normal">LR</mml:mi><mml:mo mathvariant="normal">̃</mml:mo></mml:mover></mml:math></inline-formula>, which are then
compared with the initial values (AEC<inline-formula><mml:math id="M166" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:math></inline-formula> and LR<inline-formula><mml:math id="M167" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:math></inline-formula>). We find that
TDAM resolves the two peaks of AEC separated by six points, which is related to
an effective vertical resolution of 270 m in this study. The relative
uncertainty on LR retrieval is <inline-formula><mml:math id="M168" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">30</mml:mn></mml:mrow></mml:math></inline-formula> % for the pairs with a distance of
four points, whereas other relative errors on LR are reasonable (<inline-formula><mml:math id="M169" display="inline"><mml:mrow><mml:mo>&lt;</mml:mo><mml:mn mathvariant="normal">10</mml:mn></mml:mrow></mml:math></inline-formula> %)
for pairs with a distance bigger than the effective vertical resolution.</p>
      <p id="d1e3705">Secondly, bias linked to the AEC at the reference altitude is evaluated. A
heterogeneous atmosphere is considered here, with two superimposed layers with
different aerosol loads and types (a Gaussian profile is chosen for each
layer): (i) a smoke layer (LR<inline-formula><mml:math id="M170" display="inline"><mml:mrow><mml:msub><mml:mi/><mml:mn mathvariant="normal">0</mml:mn></mml:msub><mml:mo>=</mml:mo><mml:mn mathvariant="normal">50</mml:mn></mml:mrow></mml:math></inline-formula> sr) centred at
2 km a.m.s.l., with an AOT of 0.3 and a thickness of <inline-formula><mml:math id="M171" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">500</mml:mn></mml:mrow></mml:math></inline-formula> m;
(ii) a polluted boundary layer (LR<inline-formula><mml:math id="M172" display="inline"><mml:mrow><mml:msub><mml:mi/><mml:mn mathvariant="normal">0</mml:mn></mml:msub><mml:mo>=</mml:mo><mml:mn mathvariant="normal">80</mml:mn></mml:mrow></mml:math></inline-formula> sr), with an AOT of 0.2
from the ground to 1.7 km a.m.s.l. A background aerosol condition is also
added, with a constant AEC of 0.05 km<inline-formula><mml:math id="M173" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> from 0 to 6 km
(LR<inline-formula><mml:math id="M174" display="inline"><mml:mrow><mml:msub><mml:mi/><mml:mn mathvariant="normal">0</mml:mn></mml:msub><mml:mo>=</mml:mo><mml:mn mathvariant="normal">80</mml:mn></mml:mrow></mml:math></inline-formula> sr).</p>
      <p id="d1e3772">We set the reference zone at 4–5 km, where the correct AEC
(<inline-formula><mml:math id="M175" display="inline"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mi mathvariant="normal">ref</mml:mi><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup></mml:mrow></mml:math></inline-formula>) should be 0.05 km<inline-formula><mml:math id="M176" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>. Several
artificial <inline-formula><mml:math id="M177" display="inline"><mml:mover accent="true"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mi mathvariant="normal">ref</mml:mi><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup></mml:mrow><mml:mo stretchy="true" mathvariant="normal">^</mml:mo></mml:mover></mml:math></inline-formula> values from 0 to
0.2 km<inline-formula><mml:math id="M178" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> were used for the inversion to assess the relative bias. We
found that using 0 instead of 0.05 km<inline-formula><mml:math id="M179" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> as the
<inline-formula><mml:math id="M180" display="inline"><mml:mover accent="true"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mi mathvariant="normal">ref</mml:mi><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup></mml:mrow><mml:mo stretchy="true" mathvariant="normal">^</mml:mo></mml:mover></mml:math></inline-formula>, the LR of the smoke aerosol
layer (SAL) will be overestimated, with a relative bias of <inline-formula><mml:math id="M181" display="inline"><mml:mrow><mml:mo>+</mml:mo><mml:mn mathvariant="normal">40</mml:mn></mml:mrow></mml:math></inline-formula> % in
this simulated case. When the <inline-formula><mml:math id="M182" display="inline"><mml:mover accent="true"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mi mathvariant="normal">ref</mml:mi><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup></mml:mrow><mml:mo mathvariant="normal" stretchy="true">^</mml:mo></mml:mover></mml:math></inline-formula> is
overestimated as 0.1 km<inline-formula><mml:math id="M183" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> (0.14 km<inline-formula><mml:math id="M184" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>), the bias on the LR
retrieval is <inline-formula><mml:math id="M185" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">12</mml:mn></mml:mrow></mml:math></inline-formula> % (<inline-formula><mml:math id="M186" display="inline"><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">23</mml:mn></mml:mrow></mml:math></inline-formula> %). Note that if one uses the other
three methods mentioned in Sect. 3.1 without a correct estimation of
<inline-formula><mml:math id="M187" display="inline"><mml:mover accent="true"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mi mathvariant="normal">ref</mml:mi><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup></mml:mrow><mml:mo mathvariant="normal" stretchy="true">^</mml:mo></mml:mover></mml:math></inline-formula> (i.e. 0 instead of the actual
<inline-formula><mml:math id="M188" display="inline"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mi mathvariant="normal">ref</mml:mi><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup></mml:mrow></mml:math></inline-formula>), the LR retrieval will probably be
overestimated.</p>
</sec>
<sec id="Ch1.S3.SS3.SSS3">
  <title>Random error due to noise</title>
      <p id="d1e3965">In this section, we investigate the random error due to the noise on acquired
signals, using the end-to-end simulator (Fig. 6) based on a Monte Carlo
approach. The input profiles of AEC and LR (AEC<inline-formula><mml:math id="M189" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:math></inline-formula> and
LR<inline-formula><mml:math id="M190" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:math></inline-formula> in Fig. 7a and  b) are produced by smoothing actual
measurements (17 April <inline-formula><mml:math id="M191" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 20:20 UTC). The reference altitude was
selected to be <inline-formula><mml:math id="M192" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">4</mml:mn></mml:mrow></mml:math></inline-formula> km a.m.s.l., where the
<inline-formula><mml:math id="M193" display="inline"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mi mathvariant="normal">ref</mml:mi><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup></mml:mrow></mml:math></inline-formula> was 0.032 km<inline-formula><mml:math id="M194" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> with a LR at the reference altitude
(LR<inline-formula><mml:math id="M195" display="inline"><mml:msub><mml:mi/><mml:mi mathvariant="normal">ref</mml:mi></mml:msub></mml:math></inline-formula>) of 42 sr. A total of 100 draws were performed, with the
noise level determined from the SNR of the actual lidar signals; the SNR at
the reference altitude on Raman channel signal is found to be <inline-formula><mml:math id="M196" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">184</mml:mn></mml:mrow></mml:math></inline-formula>. One draw of simulated range-corrected elastic and Raman signal is shown
in Fig. 7c and  d. The aerosol layer at <inline-formula><mml:math id="M197" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">1.5</mml:mn></mml:mrow></mml:math></inline-formula> km is related to
our observed SAL, with an initial column-equivalent lidar ratio (CLR) value
of 44 sr.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F7"><caption><p id="d1e4060">Input profiles of <bold>(a)</bold> aerosol extinction coefficient
(AEC<inline-formula><mml:math id="M198" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:math></inline-formula>) and <bold>(b)</bold> lidar ratio (LR<inline-formula><mml:math id="M199" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:math></inline-formula>) for the statistical error
study. One draw of the 100 simulated profiles of range-corrected
<bold>(c)</bold> elastic signal and <bold>(d)</bold> Raman signal is shown.</p></caption>
            <?xmltex \igopts{width=236.157874pt}?><graphic xlink:href="https://amt.copernicus.org/articles/11/6525/2018/amt-11-6525-2018-f07.png"/>

          </fig>

      <?xmltex \floatpos{t}?><fig id="Ch1.F8" specific-use="star"><caption><p id="d1e4102"><bold>(a)</bold> Percentage of inversible profiles, <bold>(b)</bold> errors
on AECref (AEC at the reference altitude, <inline-formula><mml:math id="M200" display="inline"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mi mathvariant="normal">ref</mml:mi><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup></mml:mrow></mml:math></inline-formula>,
in km<inline-formula><mml:math id="M201" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>), and <bold>(c)</bold> errors on CLR (column-equivalent lidar ratio,
in sr) due to random detection processes against the SNR at the reference
altitude (<inline-formula><mml:math id="M202" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mi mathvariant="normal">ref</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>) on the Raman channel (<inline-formula><mml:math id="M203" display="inline"><mml:mover accent="true"><mml:mrow><mml:msub><mml:mi>S</mml:mi><mml:mrow><mml:mi mathvariant="italic">λ</mml:mi><mml:mi>N</mml:mi></mml:mrow></mml:msub></mml:mrow><mml:mo mathvariant="normal">̃</mml:mo></mml:mover></mml:math></inline-formula>) using the TDAM approach. Red and black lines show values for the SAL (smoke
aerosol layer, between 1.1 and 1.8 km a.m.s.l.) and for the ABL (atmospheric
boundary layer, below 1 km a.m.s.l.), respectively.</p></caption>
            <?xmltex \igopts{width=369.885827pt}?><graphic xlink:href="https://amt.copernicus.org/articles/11/6525/2018/amt-11-6525-2018-f08.png"/>

          </fig>

      <p id="d1e4174">Through the Monte Carlo simulation, we found that for this case, when
<inline-formula><mml:math id="M204" display="inline"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mi mathvariant="normal">ref</mml:mi><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup></mml:mrow></mml:math></inline-formula> and LR<inline-formula><mml:math id="M205" display="inline"><mml:msub><mml:mi/><mml:mi mathvariant="normal">ref</mml:mi></mml:msub></mml:math></inline-formula> are assumed to be well known
(i.e. fixed as the input values), the total errors (including bias and
standard deviation) on the CLR of the SAL (at <inline-formula><mml:math id="M206" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">1.5</mml:mn></mml:mrow></mml:math></inline-formula> km a.m.s.l.) and the ABL (below 1 km a.m.s.l.) are 1.9 and 2.2 sr,
respectively. The errors on the estimation of the <inline-formula><mml:math id="M207" display="inline"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mi mathvariant="normal">ref</mml:mi><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup></mml:mrow></mml:math></inline-formula> and
LR<inline-formula><mml:math id="M208" display="inline"><mml:msub><mml:mi/><mml:mi mathvariant="normal">ref</mml:mi></mml:msub></mml:math></inline-formula> are found to be <inline-formula><mml:math id="M209" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">0.01</mml:mn></mml:mrow></mml:math></inline-formula> km<inline-formula><mml:math id="M210" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> and
<inline-formula><mml:math id="M211" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">13</mml:mn></mml:mrow></mml:math></inline-formula> sr, which results in more important errors on CLR: 3.4 sr
for the SAL and 4.2 sr for the ABL.</p>
      <p id="d1e4264">To assess the uncertainty on CLR due to random detection processes for lidar
signal of different SNRs, different levels of noise have been added to the
lidar profiles using the normal Random generator. A total of 22 SNR levels<?pagebreak page6533?> were
considered in this study, with SNR values at the reference altitude on the
<inline-formula><mml:math id="M212" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman channel signal ranging from 9 to 1840. For each SNR
level, 100 statistical draws were simulated and inverted using the end-to-end
simulator. Figure 8 show the errors on retrieved parameters due to random
detection processes against the SNR at the reference altitude (<inline-formula><mml:math id="M213" display="inline"><mml:mrow><mml:msub><mml:mi>z</mml:mi><mml:mi mathvariant="normal">ref</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>) on
the <inline-formula><mml:math id="M214" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman channel using the TDAM approach. Panel (a) shows
the percentage of inversible profile numbers. We defined “inversible
profile” as the one which can be inversed and gives us reasonable optical
values (e.g. LR). When the SNR is smaller than 10, we are not able to inverse
this lidar profile using the TDAM approach. Panels (b) and (c) show
the errors on <inline-formula><mml:math id="M215" display="inline"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mi mathvariant="normal">ref</mml:mi><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup></mml:mrow></mml:math></inline-formula> and CLR of the SAL and ABL due to random
detection processes. For SNR under 95, the relative errors on
<inline-formula><mml:math id="M216" display="inline"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">α</mml:mi><mml:mi mathvariant="normal">ref</mml:mi><mml:mi mathvariant="normal">aer</mml:mi></mml:msubsup></mml:mrow></mml:math></inline-formula> are higher than 40 %, whereas the errors on CLR are
<inline-formula><mml:math id="M217" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">4</mml:mn></mml:mrow></mml:math></inline-formula> or <inline-formula><mml:math id="M218" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">8</mml:mn></mml:mrow></mml:math></inline-formula> sr for the SAL and ABL. The error on
CLR of SAL is lower than the one of ABL, simply because of larger aerosol
load (i.e. larger AEC).</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F9" specific-use="star"><caption><p id="d1e4349">Time series, from 17 April at 18:50 UTC to 18 April at 05:00 UTC, of the
profiles of <bold>(a)</bold> aerosol extinction coefficient (AEC), and
<bold>(b)</bold> linear particle depolarization ratio (PDR). The PDR is only
considered for AEC &gt; 0.01 km<inline-formula><mml:math id="M219" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>.</p></caption>
            <?xmltex \igopts{width=398.338583pt}?><graphic xlink:href="https://amt.copernicus.org/articles/11/6525/2018/amt-11-6525-2018-f09.png"/>

          </fig>

</sec>
</sec>
</sec>
<sec id="Ch1.S4">
  <title>Aerosol optical properties of the warehouse fire smoke plume</title>
<sec id="Ch1.S4.SS1">
  <title>Lidar-derived aerosol optical properties in the low–middle
troposphere</title>
      <p id="d1e4389">The lidar observations of the low troposphere following the accidental fire
event are analysed using the TDAM approach. Lidar data are time-averaged over
60 min to increase the SNR, especially for the <inline-formula><mml:math id="M220" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman channel.
The reference zone of each profile is chosen below the thick stratus cloud.
The TDAM algorithm is applied to the average profiles for the whole
observation period to retrieve the aerosol optical parameters and mainly the
vertical profile of the LR. The LR profiles are then used to invert the 1 min
resolution elastic signal to assess the vertical profile of the AEC. As
previously explained, the PDR is only calculated for AEC greater than
0.01 km<inline-formula><mml:math id="M221" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>, as it is undefined and noisy for lower values. The
temporal evolutions of retrieved vertical profiles of both AEC and PDR are
shown in Fig. 9. Two examples of retrieved vertical profiles are also given
in Fig. 10; each one is related to 60 profiles of <inline-formula><mml:math id="M222" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:math></inline-formula> h
acquisition time centred on 17 April at 20:49 UTC or 18 April at 01:52 UTC. The
standard deviations around the mean values are represented by grey areas,
showing the uncertainty due to the signal averaging during varying
atmospheric extinction and scattering conditions. Two other time periods are
selected, when there are no clouds in the considered layers, during which the
average optical properties of three layers are summarized in Table 2.</p>
      <p id="d1e4425">We can easily figure out that the ABL or NL are well decoupled from the free
troposphere through the intensity of the backscattered signal (Fig. 3a). Before
and after 17 April at 22:00 UTC, aerosol typing in the first kilometre of
the atmosphere appears different, with a significant decrease in the PDR from
<inline-formula><mml:math id="M223" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:math></inline-formula> % to <inline-formula><mml:math id="M224" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">0.5</mml:mn></mml:mrow></mml:math></inline-formula> %. In both cases, the
aerosols are likely spherical, as they are associated with a small
depolarization ratio. This temporal evolution may be due to aerosols of
different origins being advected over time. The LR in the ABL–NL
is found to
be between 40 and 70 sr, as usually observed in the Paris area (e.g. Royer et al., 2011).</p>
      <p id="d1e4448">One thin layer is located just at the top of the ABL–NL, close to
1.2 km a.m.s.l. This aerosol layer is associated with a strong AEC
(<inline-formula><mml:math id="M225" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">0.8</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.1</mml:mn></mml:mrow></mml:math></inline-formula> km<inline-formula><mml:math id="M226" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>) and a small PDR (<inline-formula><mml:math id="M227" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">1</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.1</mml:mn></mml:mrow></mml:math></inline-formula> %). It is related to the fresh smoke plume coming from the
accidental fire. These aerosols are non-depolarizing and therefore very
likely to be spherical and composed of<?pagebreak page6534?> water-soluble compounds trapped inside
their shell. The LR of the smoke plume is <inline-formula><mml:math id="M228" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">50</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">10</mml:mn></mml:mrow></mml:math></inline-formula> sr.
The partial AOT of this layer ranges from 0.1 to 0.3, and dominates the AOT
of the full atmospheric column.</p>
      <p id="d1e4505">The upper, more depolarizing aerosol layer, located between 1.8 and
3 km a.m.s.l., presents a PDR of <inline-formula><mml:math id="M229" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">8</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:math></inline-formula> % and a
LR <inline-formula><mml:math id="M230" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">40</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">10</mml:mn></mml:mrow></mml:math></inline-formula> sr, which is characteristic of a mix of
pollution and dust aerosols. This layer fades in the morning of 18 April.
Within this layer, as within the smoke plume, aerosols seem to favour the
formation of clouds, which results in an intense backscattered signal (the
grey area seen in Fig. 3), and necessitates
the presence of hydrophilic
particles.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F10" specific-use="star"><caption><p id="d1e4539">Examples of retrieved profiles of (<bold>a</bold>) aerosol extinction coefficient
(AEC), (<bold>b</bold>) lidar ratio (LR), and (<bold>c</bold>) linear particle
depolarization ratio (PDR) of
1 h lidar measurements centred on
17 April 20:49 UTC and 18 April 01:52 UTC. Mean values are shown by black
lines and grey and green shaded areas indicate the atmospheric variability during
this 1 h period.</p></caption>
          <?xmltex \igopts{width=398.338583pt}?><graphic xlink:href="https://amt.copernicus.org/articles/11/6525/2018/amt-11-6525-2018-f10.png"/>

        </fig>

<?xmltex \floatpos{t}?><table-wrap id="Ch1.T2" specific-use="star"><caption><p id="d1e4560">Average optical properties (at 355 nm) for the ABL–NL (atmospheric
boundary layer–nocturnal layer), the SAL (smoke aerosol layer), and the
upper layer during two time periods (TPs): TP1: 17 April, 20:19–21:35 UTC, TP2:
18 April, 02:00–04:00 UTC. The atmospheric variability during the time period
is given by the standard derivation values.</p></caption><oasis:table frame="topbot"><oasis:tgroup cols="7">
     <oasis:colspec colnum="1" colname="col1" align="left"/>
     <oasis:colspec colnum="2" colname="col2" align="right"/>
     <oasis:colspec colnum="3" colname="col3" align="right" colsep="1"/>
     <oasis:colspec colnum="4" colname="col4" align="right"/>
     <oasis:colspec colnum="5" colname="col5" align="right" colsep="1"/>
     <oasis:colspec colnum="6" colname="col6" align="right"/>
     <oasis:colspec colnum="7" colname="col7" align="right"/>
     <oasis:thead>
       <oasis:row>
         <oasis:entry colname="col1">Layer</oasis:entry>
         <oasis:entry rowsep="1" namest="col2" nameend="col3" align="center" colsep="1">ABL–NL </oasis:entry>
         <oasis:entry rowsep="1" namest="col4" nameend="col5" align="center">SAL </oasis:entry>
         <oasis:entry rowsep="1" namest="col6" nameend="col7" align="center">Upper layer </oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1">Time period</oasis:entry>
         <oasis:entry colname="col2">TP1</oasis:entry>
         <oasis:entry colname="col3">TP2</oasis:entry>
         <oasis:entry colname="col4">TP1</oasis:entry>
         <oasis:entry colname="col5">TP2</oasis:entry>
         <oasis:entry colname="col6">TP1</oasis:entry>
         <oasis:entry colname="col7">TP2</oasis:entry>
       </oasis:row>
     </oasis:thead>
     <oasis:tbody>
       <oasis:row>
         <oasis:entry colname="col1">Layer centre (km)</oasis:entry>
         <oasis:entry colname="col2">0.595</oasis:entry>
         <oasis:entry colname="col3">0.640</oasis:entry>
         <oasis:entry colname="col4">1.382</oasis:entry>
         <oasis:entry colname="col5">1.450</oasis:entry>
         <oasis:entry colname="col6">2.440</oasis:entry>
         <oasis:entry colname="col7">3.092</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">Thickness (km)</oasis:entry>
         <oasis:entry colname="col2">0.945</oasis:entry>
         <oasis:entry colname="col3">1.035</oasis:entry>
         <oasis:entry colname="col4">0.360</oasis:entry>
         <oasis:entry colname="col5">0.225</oasis:entry>
         <oasis:entry colname="col6">0.855</oasis:entry>
         <oasis:entry colname="col7">0.720</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">AEC (km<inline-formula><mml:math id="M231" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>)</oasis:entry>
         <oasis:entry colname="col2"><inline-formula><mml:math id="M232" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.086</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.011</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col3"><inline-formula><mml:math id="M233" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.180</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.015</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col4"><inline-formula><mml:math id="M234" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.444</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.066</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col5"><inline-formula><mml:math id="M235" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.200</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.054</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col6"><inline-formula><mml:math id="M236" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.090</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.011</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col7"><inline-formula><mml:math id="M237" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.049</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.013</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">AOT</oasis:entry>
         <oasis:entry colname="col2"><inline-formula><mml:math id="M238" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.08</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.07</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col3"><inline-formula><mml:math id="M239" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.19</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.02</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col4"><inline-formula><mml:math id="M240" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.17</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.02</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col5"><inline-formula><mml:math id="M241" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.05</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.01</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col6"><inline-formula><mml:math id="M242" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.08</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.01</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col7"><inline-formula><mml:math id="M243" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.04</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.01</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">Max/min AOT</oasis:entry>
         <oasis:entry colname="col2">0.12/0.05</oasis:entry>
         <oasis:entry colname="col3">0.22/0.16</oasis:entry>
         <oasis:entry colname="col4">0.21/0.13</oasis:entry>
         <oasis:entry colname="col5">0.07/0.03</oasis:entry>
         <oasis:entry colname="col6">0.12/0.05</oasis:entry>
         <oasis:entry colname="col7">0.06/0.02</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">LR (sr)</oasis:entry>
         <oasis:entry colname="col2"><inline-formula><mml:math id="M244" display="inline"><mml:mrow><mml:mn mathvariant="normal">41</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">9</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col3"><inline-formula><mml:math id="M245" display="inline"><mml:mrow><mml:mn mathvariant="normal">54</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col4"><inline-formula><mml:math id="M246" display="inline"><mml:mrow><mml:mn mathvariant="normal">46</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col5"><inline-formula><mml:math id="M247" display="inline"><mml:mrow><mml:mn mathvariant="normal">56</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col6"><inline-formula><mml:math id="M248" display="inline"><mml:mrow><mml:mn mathvariant="normal">40</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">5</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col7"><inline-formula><mml:math id="M249" display="inline"><mml:mrow><mml:mn mathvariant="normal">43</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">PDR (%)</oasis:entry>
         <oasis:entry rowsep="1" colname="col2"><inline-formula><mml:math id="M250" display="inline"><mml:mrow><mml:mn mathvariant="normal">3.1</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.1</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry rowsep="1" colname="col3"><inline-formula><mml:math id="M251" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.7</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.1</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry rowsep="1" colname="col4"><inline-formula><mml:math id="M252" display="inline"><mml:mrow><mml:mn mathvariant="normal">1.3</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.2</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry rowsep="1" colname="col5"><inline-formula><mml:math id="M253" display="inline"><mml:mrow><mml:mn mathvariant="normal">1.1</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.4</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry rowsep="1" colname="col6"><inline-formula><mml:math id="M254" display="inline"><mml:mrow><mml:mn mathvariant="normal">6.2</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.7</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry rowsep="1" colname="col7"><inline-formula><mml:math id="M255" display="inline"><mml:mrow><mml:mn mathvariant="normal">7.7</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.9</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">Possible aerosol type</oasis:entry>
         <oasis:entry namest="col2" nameend="col3" align="center" colsep="1">Continental polluted aerosols </oasis:entry>
         <oasis:entry namest="col4" nameend="col5" align="center">Fresh smoke coming </oasis:entry>
         <oasis:entry namest="col6" nameend="col7" align="center">Mix of pollution </oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1"/>
         <oasis:entry namest="col2" nameend="col3" align="center" colsep="1"/>
         <oasis:entry namest="col4" nameend="col5" align="center">from the warehouse fire </oasis:entry>
         <oasis:entry namest="col6" nameend="col7" align="center">and dust aerosols </oasis:entry>
       </oasis:row>
     </oasis:tbody>
   </oasis:tgroup></oasis:table></table-wrap>

</sec>
<sec id="Ch1.S4.SS2">
  <title>Discussion</title>
<sec id="Ch1.S4.SS2.SSS1">
  <title>Comparison of the warehouse fire smoke and biomass burning
smoke</title>
      <p id="d1e5096">The freshly emitted smoke plumes from an accidental warehouse fire were
sampled. Such observations are absent in the literature, so we compared the
optical properties of SAL from the warehouse fire (in Table 2) with the ones
of biomass burning smoke (Table 3). Simultaneous observations at 355 and 532 nm showed a strong wavelength dependency of the LR of aged biomass burning
aerosols (Müller et al., 2007; Nicolae
et al., 2013) and a smaller dependency for fresh biomass burning aerosols
(Nicolae et al.,
2013; Pereira et al., 2014). Our measurements will be compared preferentially
with other observations at 355 nm. The LR found for SAL is in the middle
range of the large dispersion of 355 nm LR values (from 32 to 73 sr) found
from the literature (Table 3). Measurement of a mixed smoke and dust layer
suggests that the PDR does not vary much with wavelength (Groß et al., 2011). The PDR at 355 nm of
SAL (<inline-formula><mml:math id="M256" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:math></inline-formula> %) in this study is small compared to the PDR at
532 nm retrieved for smoke in the literature (2 %–5 %, Table 3). We
reported measurement of biomass burning particles with a LR of <inline-formula><mml:math id="M257" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">63</mml:mn></mml:mrow></mml:math></inline-formula> and a PDR of 1 %–4 % over the Siberra region (Dieudonné et al., 2015,
Table 3), using a similar lidar system.</p>

<?xmltex \floatpos{t}?><table-wrap id="Ch1.T3" specific-use="star"><caption><p id="d1e5122">Optical properties found in the literature about biomass burning
events and used to compare with the obtained values of the warehouse fire
SAL (smoke aerosol layer) in Table 2.</p></caption><oasis:table frame="topbot"><oasis:tgroup cols="7">
     <oasis:colspec colnum="1" colname="col1" align="left"/>
     <oasis:colspec colnum="2" colname="col2" align="left"/>
     <oasis:colspec colnum="3" colname="col3" align="right"/>
     <oasis:colspec colnum="4" colname="col4" align="right"/>
     <oasis:colspec colnum="5" colname="col5" align="right"/>
     <oasis:colspec colnum="6" colname="col6" align="right"/>
     <oasis:colspec colnum="7" colname="col7" align="left"/>
     <oasis:thead>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1">Ageing</oasis:entry>
         <oasis:entry colname="col2">Source region</oasis:entry>
         <oasis:entry colname="col3">LR 355 (sr)</oasis:entry>
         <oasis:entry colname="col4">LR 532 (sr)</oasis:entry>
         <oasis:entry colname="col5">PDR 355</oasis:entry>
         <oasis:entry colname="col6">PDR 532</oasis:entry>
         <oasis:entry colname="col7">Reference</oasis:entry>
       </oasis:row>
     </oasis:thead>
     <oasis:tbody>
       <oasis:row>
         <oasis:entry colname="col1">&lt; 1 day aged</oasis:entry>
         <oasis:entry colname="col2">Romania</oasis:entry>
         <oasis:entry colname="col3">43–73</oasis:entry>
         <oasis:entry colname="col4">43–46</oasis:entry>
         <oasis:entry colname="col5">–</oasis:entry>
         <oasis:entry colname="col6">2–4</oasis:entry>
         <oasis:entry colname="col7">Nicolae et al. (2013)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">1–2 days aged</oasis:entry>
         <oasis:entry colname="col2">Iberian Peninsula</oasis:entry>
         <oasis:entry colname="col3">52–66</oasis:entry>
         <oasis:entry colname="col4">49–66</oasis:entry>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6">3.8–5</oasis:entry>
         <oasis:entry colname="col7">Pereira et al. (2014)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">2–3 days aged</oasis:entry>
         <oasis:entry colname="col2">Ukraine</oasis:entry>
         <oasis:entry colname="col3">32–48</oasis:entry>
         <oasis:entry colname="col4">52–54</oasis:entry>
         <oasis:entry colname="col5">–</oasis:entry>
         <oasis:entry colname="col6">2–4</oasis:entry>
         <oasis:entry colname="col7">Nicolae et al. (2013)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">Aged</oasis:entry>
         <oasis:entry colname="col2">Siberia/Canada</oasis:entry>
         <oasis:entry colname="col3"><inline-formula><mml:math id="M258" display="inline"><mml:mrow><mml:mn mathvariant="normal">46</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">13</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col4"><inline-formula><mml:math id="M259" display="inline"><mml:mrow><mml:mn mathvariant="normal">53</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">11</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col5">–</oasis:entry>
         <oasis:entry colname="col6">&lt; 5</oasis:entry>
         <oasis:entry colname="col7">Müller et al. (2007)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">Aged</oasis:entry>
         <oasis:entry colname="col2">Siberia</oasis:entry>
         <oasis:entry colname="col3"><inline-formula><mml:math id="M260" display="inline"><mml:mrow><mml:mn mathvariant="normal">63</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">15</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col4">–</oasis:entry>
         <oasis:entry colname="col5">1–4</oasis:entry>
         <oasis:entry colname="col6">–</oasis:entry>
         <oasis:entry colname="col7">Dieudonné et al. (2015)</oasis:entry>
       </oasis:row>
     </oasis:tbody>
   </oasis:tgroup></oasis:table></table-wrap>

</sec>
<sec id="Ch1.S4.SS2.SSS2">
  <title>Exogenous observations to confirm lidar-derived hypotheses</title>
      <p id="d1e5336">The total AOT and the visible Ångström exponent were extracted from
the Aerosol Robotic Network (AERONET) for the sun photometer located at
Palaiseau (<uri>http://aeronet.gsfc.nasa.gov/</uri>, last access: 3 December 2018; Fig. 1). Elevated AOT values, between 0.58 and 0.95 at 355 nm, were observed on
17 April. This is the peak value of the whole month (the monthly mean AOT is
<inline-formula><mml:math id="M261" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">0.2</mml:mn></mml:mrow></mml:math></inline-formula> in cloud-free conditions, corresponding to the background
conditions as shown by Chazette and Royer, 2017). Nevertheless,
there is only one available value (0.95) at <inline-formula><mml:math id="M262" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 16:20 UTC, from
14:30 UTC to the end of the day (17 April), due to the cloud cover.</p>
      <p id="d1e5359">Four downwind air quality stations (AS; Fig. 1a) of the AIRPARIF air
quality network (<uri>http://www.airparif.asso.fr/</uri>, last access: 3 December 2018) measured the PM<inline-formula><mml:math id="M263" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">10</mml:mn></mml:msub></mml:math></inline-formula>
concentrations at <inline-formula><mml:math id="M264" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:math></inline-formula> m above ground level during the warehouse
fire event, as shown in Fig. 1c. The one nearest AS1 is a traffic
station, 4 km away from the warehouse fire location. The average
daytime value at AS1 on 17 April was <inline-formula><mml:math id="M265" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">60</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math id="M266" display="inline"><mml:mi mathvariant="normal">µ</mml:mi></mml:math></inline-formula>g m<inline-formula><mml:math id="M267" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>,
exceeding the information threshold for air quality; two outlying values
exceed the alert threshold at around 18:00 and 20:00 UTC. However, there was no
significant increase in PM<inline-formula><mml:math id="M268" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">10</mml:mn></mml:msub></mml:math></inline-formula> compared to the values of the whole month.
The warehouse fire mainly injected aerosols into the low free<?pagebreak page6535?> troposphere by
pyro-convection, just above the ABL situated close to 1 km a.m.s.l. This
kind of event appears to have a negligible impact on the air quality measured
at ground level. It mainly impacts the lower free troposphere, just above the
ABL, as shown from lidar measurements.</p>
      <p id="d1e5423">In Sect. 4.1, we found that lidar-derived optical
parameters are quite different for aerosols in the ABL–NL before and after
17 April at 22:00 UTC. It should be due to the change in air mass. In order
to investigate the origins of these aerosols, back-trajectory analysis in
ensemble mode was performed using the NOAA HYSPLIT model (HYbrid Single-Particle
Lagrangian Integrated Trajectory model, available at
<uri>http://ready.arl.noaa.gov</uri>, last access: 3 December 2018). Results show that for the first part (before
22:00 UTC in Fig. 9), air mass origin is mainly
from the south of France with a mix from the west of Germany, whereas for
the second part (after 22:00 UTC in Fig. 9), air
masses seem to be only coming from Benelux and Germany, loaded with
pollution particles. Note that it was raining during the night from 16 to 17 April, and there was no rain during the day of 17 April
(<uri>http://sirta.ipsl.fr/</uri>, last access: 3 December 2018).</p>
      <p id="d1e5432">The origin of the upper depolarized aerosol plume, located between 1.8 and
3 km a.m.s.l. (Fig. 9), was also investigated. The reanalysed products of
the numerical weather prediction model ECMWF IFS (<uri>http://www.ecmwf.int</uri>, last access: 3 December 2018) are
used to provide the meteorological fields. The one at 750 hPa
(<inline-formula><mml:math id="M269" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">2.5</mml:mn></mml:mrow></mml:math></inline-formula> km a.m.s.l.) on 16 April 00:00 UTC shows that a
corridor has been created between northern Africa and western Europe, which
favoured the transport of dusts, associated with a low located on the Iberian
Peninsula backed by a ridge joining the Sahara to western Europe (Fig. S1
in the Supplement). The low attenuated when it moved eastward. Another more
active low was enhanced near the Coruña region (Fig. S1). The latter
allowed a recirculation of air masses, initially loaded with dust, above the
UK and then towards France.<?pagebreak page6536?> The AOT at 550 nm from daily MODIS level 2
aerosol products (MYD04_L2 and MOD04_L2) also
shows the transport of dusts from Morocco and Algeria to France on 16 April
(Fig. S2). Note that in the <inline-formula><mml:math id="M270" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.4</mml:mn><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup><mml:mo>×</mml:mo><mml:mn mathvariant="normal">0.4</mml:mn><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:mrow></mml:math></inline-formula> area
around Paris, the MODIS-derived AOT is <inline-formula><mml:math id="M271" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">0.55</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.09</mml:mn></mml:mrow></mml:math></inline-formula> on
17 April, matching the in situ measurements. These air masses moved eastward
on 17 April and did not contribute directly to dust loads over the Paris
area. The dust plume seen on the lidar measurements is probably related to
the recirculation of air masses on 16 April. This plume is easily identified
(Fig. S3) as dust layers between 2 and 4 km a.m.s.l. over the English
Channel on the lidar vertical feature mask data product (Level 2, v4.10;
Burton et al., 2013) derived from the
CALIOP (Cloud-Aerosol Lidar with Orthogonal Polarization,
<uri>https://www-calipso.larc.nasa.gov/</uri>, last access: 3 December 2018) measurements. The CALIOP-derived PDR at
532 nm of this dust layer has values of the order of 30 % (the related
PDR at 355 nm is <inline-formula><mml:math id="M272" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">25</mml:mn></mml:mrow></mml:math></inline-formula> % as proposed in Groß et al., 2015) corresponding to
dust aerosols. The 6-day back trajectories (Fig. S3) illustrate that for
the aerosol plume examined between 1.8 and 3 km a.m.s.l. over the Paris
area, a very strong recirculation can be observed on 17 April at 18:00 UTC. The
contribution originating directly from northern Africa is very weak.</p>
</sec>
</sec>
</sec>
<sec id="Ch1.S5" sec-type="conclusions">
  <title>Conclusions</title>
      <p id="d1e5505">For the first time, a ground-based <inline-formula><mml:math id="M273" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman lidar sampled freshly
emitted smoke plumes originating from a large accidental warehouse fire that
occurred on 17 April 2015. It was an exceptional event for the Paris area,
but despite a strong smell throughout the region, it did not significantly
exceed background aerosol levels measured by the ground-based air quality
network before it was observed by the automatic <inline-formula><mml:math id="M274" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">N</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> Raman LAASURS located 15 km south of Paris. The lidar profiles have been inverted
using a new algorithm named top-down aerosol optical thickness matching
(TDAM). Such an approach allows for the retrieval of the aerosol extinction and backscatter coefficients and lidar ratio in complex cases with a highly
inhomogeneous atmosphere. Furthermore, this method can be used in the event
of a limited maximum range or a thick aerosol load that prevents a
purely molecular zone for normalization being prevented, as required by traditional methods.
The uncertainties of the TDAM inversion are studied, showing good accuracy in
the retrieved aerosol optical parameters: e.g. for the observed warehouse
fire smoke aerosol layer, the uncertainties are 10 sr for the lidar ratio,
0.1 km<inline-formula><mml:math id="M275" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> for the AEC, and 0.1 % for the PDR. Overall, the TDAM
approach proves advantageous in heterogeneous atmospheric conditions, with a
better effective vertical resolution and less bias when there are aerosols
in the free troposphere.</p>
      <p id="d1e5542">The optical properties of the warehouse fire smoke aerosols were
characterized using this TDAM approach. This thin smoke plume,
<inline-formula><mml:math id="M276" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 0.4 km wide, located at <inline-formula><mml:math id="M277" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">1.2</mml:mn></mml:mrow></mml:math></inline-formula> km a.m.s.l.,
has a strong AEC (<inline-formula><mml:math id="M278" display="inline"><mml:mo lspace="0mm">∼</mml:mo></mml:math></inline-formula> 0.8 km<inline-formula><mml:math id="M279" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>) and a small PDR
(<inline-formula><mml:math id="M280" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:math></inline-formula> %), containing spherical, moderately absorbent
aerosols. The LR of the fire smoke plume was derived as <inline-formula><mml:math id="M281" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">50</mml:mn></mml:mrow></mml:math></inline-formula> sr
at 355 nm wavelength and corresponds to values previously retrieved for
polluted dust aerosol or long-range-transported biomass burning aerosols.</p>
      <p id="d1e5602">The Raman lidar system is shown once again to be a strong tool to sample
aerosol layers during extreme events, which argues for the existence of
lidar networks dedicated to the monitoring of air quality and airborne
threats due to exceptional events that can occur in urban areas.</p>
</sec>

      
      </body>
    <back><notes notes-type="dataavailability">

      <p id="d1e5609">All data are available from the authors upon request.</p>
  </notes><app-group>
        <supplementary-material position="anchor"><p id="d1e5612">The supplement related to this article is available online at: <inline-supplementary-material xlink:href="https://doi.org/10.5194/amt-11-6525-2018-supplement" xlink:title="pdf">https://doi.org/10.5194/amt-11-6525-2018-supplement</inline-supplementary-material>.</p></supplementary-material>
        </app-group><notes notes-type="authorcontribution">

      <p id="d1e5621">XS participated in the experiment,
analysed the Raman lidar data, developed the algorithm, and wrote the paper;
PC conceived and managed the project, performed the experiment,
developed the algorithm, and participated in the editing of the paper; JT
maintained the Raman lidar and participated in the experiment and the editing of the paper.</p>
  </notes><notes notes-type="competinginterests">

      <p id="d1e5627">The authors declare that they have no conflict of interest.</p>
  </notes><ack><title>Acknowledgements</title><p id="d1e5633">This work was supported by the Commissariat à l'Energie Atomique et aux
énergies alternatives (CEA). The authors would like to thank the
AIRPARIF network for providing ground-level aerosol data (available at
<uri>http://www.airparif.asso.fr/en/telechargement/telechargement-station</uri>, last access: 3 December 2018) and the
AERONET network for sun photometer products (at
<uri>https://aeronet.gsfc.nasa.gov/</uri>, last access: 3 December 2018). The authors acknowledge the MODIS Science,
Processing and Data Support Teams for producing and providing MODIS data (at
<uri>https://modis.gsfc.nasa.gov/data/dataprod/</uri>, last access: 3 December 2018), and the NASA Langley Research
Center Atmospheric Sciences Data Center for the data processing and
distribution of CALIPSO products (level 4.10, at
<uri>https://eosweb.larc.nasa.gov/HORDERBIN/HTML_Start.cgi</uri>, last access: 3 December 2018). The
NOAA Air Resources Laboratory (ARL) is acknowledged for the provision of the
HYSPLIT transport and dispersion model and READY website
(<uri>http://www.ready.noaa.gov</uri>, last access: 3 December 2018) used in this publication. ECMWF data used in
this study were obtained from the ESPRI/IPSL data server.<?xmltex \hack{\newline}?><?xmltex \hack{\newline}?>
Edited by: Ulla Wandinger<?xmltex \hack{\newline}?>
Reviewed by: two anonymous referees</p></ack><ref-list>
    <title>References</title>

      <ref id="bib1.bib1"><label>1</label><mixed-citation>Ångström, A.: The parameters of atmospheric turbidity, Tellus A, 16,
64–75, <ext-link xlink:href="https://doi.org/10.3402/tellusa.v16i1.8885" ext-link-type="DOI">10.3402/tellusa.v16i1.8885</ext-link>, 1964.</mixed-citation></ref>
      <ref id="bib1.bib2"><label>2</label><mixed-citation>Ansmann, A.: Ground-truth aerosol lidar observations: can the Klett solutions
obtained from ground and space be equal for the same aerosol case?, Appl.
Opt., 45, 3367, <ext-link xlink:href="https://doi.org/10.1364/AO.45.003367" ext-link-type="DOI">10.1364/AO.45.003367</ext-link>, 2006.</mixed-citation></ref>
      <ref id="bib1.bib3"><label>3</label><mixed-citation>Ansmann, A., Riebesell, M., and Weitkamp, C.: Measurement of atmospheric
aerosol extinction profiles with a Raman lidar, Opt. Lett., 15, 746,
<ext-link xlink:href="https://doi.org/10.1364/OL.15.000746" ext-link-type="DOI">10.1364/OL.15.000746</ext-link>, 1990.</mixed-citation></ref>
      <ref id="bib1.bib4"><label>4</label><mixed-citation>Ansmann, A., Wandinger, U., Riebesell, M., Weitkamp, C., and Michaelis, W.:
Independent measurement of extinction and backscatter profiles in cirrus
clouds by using a combined Raman elastic-backscatter lidar., Appl. Opt.,
31, 7113, <ext-link xlink:href="https://doi.org/10.1364/AO.31.007113" ext-link-type="DOI">10.1364/AO.31.007113</ext-link>, 1992.</mixed-citation></ref>
      <ref id="bib1.bib5"><label>5</label><mixed-citation>Ansmann, A., Seifert, P., Tesche, M., and Wandinger, U.: Profiling of fine
and coarse particle mass: case studies of Saharan dust and
Eyjafjallajökull/Grimsvötn volcanic plumes, Atmos. Chem. Phys., 12,
9399–9415, <ext-link xlink:href="https://doi.org/10.5194/acp-12-9399-2012" ext-link-type="DOI">10.5194/acp-12-9399-2012</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bib6"><label>6</label><mixed-citation>Behrendt, A., Wulfmeyer, V., Schaberl, T., Bauer, H.-S., Kiemle, C., Ehret,
G., Flamant, C., Kooi, S., Ismail, S., Ferrare, R., Browell, E. V., and
Whiteman, D. N.: Intercomparison of Water Vapor Data Measured with Lidar
during IHOP_2002, Part II: Airborne-to-Airborne Systems, J. Atmos. Ocean.
Technol., 24, 22–39, <ext-link xlink:href="https://doi.org/10.1175/JTECH1925.1" ext-link-type="DOI">10.1175/JTECH1925.1</ext-link>, 2007.</mixed-citation></ref>
      <ref id="bib1.bib7"><label>7</label><mixed-citation>Binietoglou, I., Basart, S., Alados-Arboledas, L., Amiridis, V., Argyrouli,
A., Baars, H., Baldasano, J. M., Balis, D., Belegante, L., Bravo-Aranda, J.
A., Burlizzi, P., Carrasco, V., Chaikovsky, A., Comerón, A., D'Amico, G.,
Filioglou, M., Granados-Muñoz, M. J., Guerrero-Rascado, J. L., Ilic, L.,
Kokkalis, P., Maurizi, A., Mona, L., Monti, F., Muñoz-Porcar, C.,
Nicolae, D., Papayannis, A., Pappalardo, G., Pejanovic, G., Pereira, S. N.,
Perrone, M. R., Pietruczuk, A., Posyniak, M., Rocadenbosch, F.,
Rodríguez-Gómez, A., Sicard, M., Siomos, N., Szkop, A., Terradellas,
E., Tsekeri, A., Vukovic, A., Wandinger, U., and Wagner, J.: A methodology
for investigating dust model performance using synergistic EARLINET/AERONET
dust concentration retrievals, Atmos. Meas. Tech., 8, 3577–3600,
<ext-link xlink:href="https://doi.org/10.5194/amt-8-3577-2015" ext-link-type="DOI">10.5194/amt-8-3577-2015</ext-link>, 2015.</mixed-citation></ref>
      <ref id="bib1.bib8"><label>8</label><mixed-citation>Burton, S. P., Ferrare, R. A., Vaughan, M. A., Omar, A. H., Rogers, R. R.,
Hostetler, C. A., and Hair, J. W.: Aerosol classification from airborne HSRL
and comparisons with the CALIPSO vertical feature mask, Atmos. Meas. Tech.,
6, 1397–1412, <ext-link xlink:href="https://doi.org/10.5194/amt-6-1397-2013" ext-link-type="DOI">10.5194/amt-6-1397-2013</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bib9"><label>9</label><mixed-citation>Chazette, P. and Royer, P.: Springtime major pollution events by aerosol over
Paris Area: From a case study to a multiannual analysis, J. Geophys.
Res.-Atmos., 122, 8101–8119, <ext-link xlink:href="https://doi.org/10.1002/2017JD026713" ext-link-type="DOI">10.1002/2017JD026713</ext-link>, 2017.</mixed-citation></ref>
      <ref id="bib1.bib10"><label>10</label><mixed-citation>
Chazette, P., Pelon, J., and Mégie, G.: Determination by spaceborne
backscatter lidar of the structural parameters of atmospheric scattering
layers., Appl. Opt., 40, 3428–3440, 2001.</mixed-citation></ref>
      <ref id="bib1.bib11"><label>11</label><mixed-citation>Chazette, P., Sanak, J., and Dulac, F.: New approach for aerosol profiling
with a lidar onboard an ultralight aircraft: application to the African
Monsoon Multidisciplinary Analysis., Environ. Sci. Technol., 41, 8335–8341,
<ext-link xlink:href="https://doi.org/10.1021/es070343y" ext-link-type="DOI">10.1021/es070343y</ext-link>, 2007.</mixed-citation></ref>
      <ref id="bib1.bib12"><label>12</label><mixed-citation>Chazette, P., Raut, J.-C., Dulac, F., Berthier, S., Kim, S.-W., Royer, P.,
Sanak, J., Loaëc, S., and Grigaut-Desbrosses, H.: Simultaneous
observations of lower tropospheric continental aerosols with a ground-based,
an airborne, and the spaceborne CALIOP lidar system, J. Geophys. Res.,
115, D00H31,
<ext-link xlink:href="https://doi.org/10.1029/2009JD012341" ext-link-type="DOI">10.1029/2009JD012341</ext-link>, 2010.</mixed-citation></ref>
      <ref id="bib1.bib13"><label>13</label><mixed-citation>Chazette, P., Dabas, A., Sanak, J., Lardier, M., and Royer, P.: French
airborne lidar measurements for Eyjafjallajökull ash plume survey, Atmos.
Chem. Phys., 12, 7059–7072, <ext-link xlink:href="https://doi.org/10.5194/acp-12-7059-2012" ext-link-type="DOI">10.5194/acp-12-7059-2012</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bib14"><label>14</label><mixed-citation>Chazette, P., Marnas, F., and Totems, J.: The mobile Water vapor Aerosol
Raman LIdar and its implication in the framework of the HyMeX and ChArMEx
programs: application to a dust transport process, Atmos. Meas. Tech., 7,
1629–1647, <ext-link xlink:href="https://doi.org/10.5194/amt-7-1629-2014" ext-link-type="DOI">10.5194/amt-7-1629-2014</ext-link>, 2014.</mixed-citation></ref>
      <ref id="bib1.bib15"><label>15</label><mixed-citation>Chazette, P., Totems, J., Ancellet, G., Pelon, J., and Sicard, M.: Temporal
consistency of lidar observations during aerosol transport events in the
framework of the ChArMEx/ADRIMED campaign at Minorca in June 2013, Atmos.
Chem. Phys., 16, 2863–2875, <ext-link xlink:href="https://doi.org/10.5194/acp-16-2863-2016" ext-link-type="DOI">10.5194/acp-16-2863-2016</ext-link>, 2016.</mixed-citation></ref>
      <ref id="bib1.bib16"><label>16</label><mixed-citation>
Collis, R. T. H. and Russel, P. B.: Laser Monitoring of the Atmosphere,
edited by: Hinkley, E. D., Springer Berlin Heidelberg, Berlin, Heidelberg,
1976.</mixed-citation></ref>
      <ref id="bib1.bib17"><label>17</label><mixed-citation>Dieudonné, E., Chazette, P., Marnas, F., Totems, J., and Shang, X.: Lidar
profiling of aerosol optical properties from Paris to Lake Baikal (Siberia),
Atmos. Chem. Phys., 15, 5007–5026, <ext-link xlink:href="https://doi.org/10.5194/acp-15-5007-2015" ext-link-type="DOI">10.5194/acp-15-5007-2015</ext-link>,
2015.</mixed-citation></ref>
      <ref id="bib1.bib18"><label>18</label><mixed-citation>Di Girolamo, P.: Rotational Raman Lidar measurements of atmospheric
temperature in the UV, Geophys. Res. Lett., 31, L01106,
<ext-link xlink:href="https://doi.org/10.1029/2003GL018342" ext-link-type="DOI">10.1029/2003GL018342</ext-link>, 2004.</mixed-citation></ref>
      <?pagebreak page6538?><ref id="bib1.bib19"><label>19</label><mixed-citation>Dubovik, O., Holben, B., Eck, T. F., Smirnov, A., Kaufman, Y. J., King, M.
D., Tanré, D., and Slutsker, I.: Variability of Absorption and Optical
Properties of Key Aerosol Types Observed in Worldwide Locations, J. Atmos.
Sci., 59, 590–608, <ext-link xlink:href="https://doi.org/10.1175/1520-0469(2002)059&lt;0590:VOAAOP&gt;2.0.CO;2" ext-link-type="DOI">10.1175/1520-0469(2002)059&lt;0590:VOAAOP&gt;2.0.CO;2</ext-link>,
2002.</mixed-citation></ref>
      <ref id="bib1.bib20"><label>20</label><mixed-citation>Groß, S., Gasteiger, J., Freudenthaler, V., Wiegner, M., Geiß, A.,
Schladitz, A., Toledano, C., Kandler, K., Tesche, M., Ansmann, A., and
Wiedensohler, A.: Characterization of the planetary boundary layer during
SAMUM-2 by means of lidar measurements, Tellus B., 63, 695–705,
<ext-link xlink:href="https://doi.org/10.1111/j.1600-0889.2011.00557.x" ext-link-type="DOI">10.1111/j.1600-0889.2011.00557.x</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bib21"><label>21</label><mixed-citation>Groß, S., Freudenthaler, V., Schepanski, K., Toledano, C., Schäfler,
A., Ansmann, A., and Weinzierl, B.: Optical properties of long-range
transported Saharan dust over Barbados as measured by dual-wavelength
depolarization Raman lidar measurements, Atmos. Chem. Phys., 15,
11067–11080, <ext-link xlink:href="https://doi.org/10.5194/acp-15-11067-2015" ext-link-type="DOI">10.5194/acp-15-11067-2015</ext-link>, 2015.</mixed-citation></ref>
      <ref id="bib1.bib22"><label>22</label><mixed-citation>Haustein, K., Pérez, C., Baldasano, J. M., Müller, D., Tesche, M.,
Schladitz, A., Esselborn, M., Weinzierl, B., Kandler, K., and von
Hoyningen-Huene, W.: Regional dust model performance during SAMUM 2006,
Geophys. Res. Lett., 36, L03812, <ext-link xlink:href="https://doi.org/10.1029/2008GL036463" ext-link-type="DOI">10.1029/2008GL036463</ext-link>, 2009.</mixed-citation></ref>
      <ref id="bib1.bib23"><label>23</label><mixed-citation>Kanitz, T., Ansmann, A., Seifert, P., Engelmann, R., Kalisch, J., and
Althausen, D.: Radiative effect of aerosols above the northern and southern
Atlantic Ocean as determined from shipborne lidar observations, J. Geophys.
Res. Atmos., 118, 12556–12565, <ext-link xlink:href="https://doi.org/10.1002/2013JD019750" ext-link-type="DOI">10.1002/2013JD019750</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bib24"><label>24</label><mixed-citation>King, L. V.: On the Complex Anisotropic Molecule in Relation to the
Dispersion and Scattering of Light, Proc. Royal Soc. London, 1, 333–357
available at:
<uri>http://www.researchgate.net/publication/247031191_On_the_Complex_Anisotropic_Molecule_in_Relation_to_the_Dispersion_and_Scattering_of_Light</uri> (last access: 30 July 2014), 1923.</mixed-citation></ref>
      <ref id="bib1.bib25"><label>25</label><mixed-citation>Klett, J. D.: Stable analytical inversion solution for processing lidar
returns, Appl. Opt., 20, 211, <ext-link xlink:href="https://doi.org/10.1364/AO.20.000211" ext-link-type="DOI">10.1364/AO.20.000211</ext-link>, 1981.</mixed-citation></ref>
      <ref id="bib1.bib26"><label>26</label><mixed-citation>Mattis, I., Siefert, P., Müller, D., Tesche, M., Hiebsch, A., Kanitz, T.,
Schmidt, J., Finger, F., Wandinger, U., and Ansmann, A.: Volcanic aerosol
layers observed with multiwavelength Raman lidar over central Europe in
2008–2009, J. Geophys. Res., 115, D00L04, <ext-link xlink:href="https://doi.org/10.1029/2009JD013472" ext-link-type="DOI">10.1029/2009JD013472</ext-link>, 2010.</mixed-citation></ref>
      <ref id="bib1.bib27"><label>27</label><mixed-citation>
Measures, R. M.: Laser Remote Sensing: Fundamentals and Applications, edited
by: Wiley, J., Krieger publishing company, Malabar, Florida, USA, 1984.</mixed-citation></ref>
      <ref id="bib1.bib28"><label>28</label><mixed-citation>Müller, D., Ansmann, A., Mattis, I., Tesche, M., Wandinger, U.,
Althausen, D., and Pisani, G.: Aerosol-type-dependent lidar ratios observed
with Raman lidar, J. Geophys. Res., 112, D16202,
<ext-link xlink:href="https://doi.org/10.1029/2006JD008292" ext-link-type="DOI">10.1029/2006JD008292</ext-link>, 2007.</mixed-citation></ref>
      <ref id="bib1.bib29"><label>29</label><mixed-citation>Nicolae, D., Nemuc, A., Müller, D., Talianu, C., Vasilescu, J.,
Belegante, L., and Kolgotin, A.: Characterization of fresh and aged biomass
burning events using multiwavelength Raman lidar and mass spectrometry, J.
Geophys. Res.-Atmos., 118, 2956–2965, <ext-link xlink:href="https://doi.org/10.1002/jgrd.50324" ext-link-type="DOI">10.1002/jgrd.50324</ext-link>, 2013.
</mixed-citation></ref><?xmltex \hack{\newpage}?>
      <ref id="bib1.bib30"><label>30</label><mixed-citation>Nicolet, M.: On the molecular scattering in the terrestrial atmosphere?: An
empirical formula for its calculation in the homosphere, Planet. Space Sci.,
32, 1467–1468, <ext-link xlink:href="https://doi.org/10.1016/0032-0633(84)90089-8" ext-link-type="DOI">10.1016/0032-0633(84)90089-8</ext-link>, 1984.</mixed-citation></ref>
      <ref id="bib1.bib31"><label>31</label><mixed-citation>Pappalardo, G., Amodeo, A., Pandolfi, M., Wandinger, U., Ansmann, A.,
Bösenberg, J., Matthias, V., Amiridis, V., De Tomasi, F., Frioud, M.,
Iarlori, M., Komguem, L., Papayannis, A., Rocadenbosch, F., and Wang, X.:
Aerosol lidar intercomparison in the framework of the EARLINET project 3
Raman lidar algorithm for aerosol extinction, backscatter, and lidar ratio,
Appl. Opt., 43, 5370, <ext-link xlink:href="https://doi.org/10.1364/AO.43.005370" ext-link-type="DOI">10.1364/AO.43.005370</ext-link>, 2004.</mixed-citation></ref>
      <ref id="bib1.bib32"><label>32</label><mixed-citation>Pereira, S. N., Preißler, J., Guerrero-Rascado, J. L., Silva, A. M., and
Wagner, F.: Forest fire smoke layers observed in the free troposphere over
Portugal with a multiwavelength Raman lidar: optical and microphysical
properties., Sci. World J., 2014, 421838, <ext-link xlink:href="https://doi.org/10.1155/2014/421838" ext-link-type="DOI">10.1155/2014/421838</ext-link>,
2014.</mixed-citation></ref>
      <ref id="bib1.bib33"><label>33</label><mixed-citation>Royer, P., Chazette, P., Lardier, M., and Sauvage, L.: Aerosol content survey
by mini N2-Raman lidar: Application to local and long-range transport
aerosols, Atmos. Environ., 45, 7487–7495,
<ext-link xlink:href="https://doi.org/10.1016/j.atmosenv.2010.11.001" ext-link-type="DOI">10.1016/j.atmosenv.2010.11.001</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bib34"><label>34</label><mixed-citation>Sasano, Y., Browell, E. V., and Ismail, S.: Error caused by using a constant
extinction/backscattering ratio in the lidar solution, Appl. Opt., 24,
3929, <ext-link xlink:href="https://doi.org/10.1364/AO.24.003929" ext-link-type="DOI">10.1364/AO.24.003929</ext-link>, 1985.</mixed-citation></ref>
      <ref id="bib1.bib35"><label>35</label><mixed-citation>Shang, X. and Chazette, P.: End-to-End Simulation for a Forest-Dedicated
Full-Waveform Lidar Onboard a Satellite Initialized from Airborne Ultraviolet
Lidar Experiments, Remote Sens., 7, 5222–5255, <ext-link xlink:href="https://doi.org/10.3390/rs70505222" ext-link-type="DOI">10.3390/rs70505222</ext-link>,
2015.</mixed-citation></ref>
      <ref id="bib1.bib36"><label>36</label><mixed-citation>Shcherbakov, V.: Regularized algorithm for Raman lidar data processing, Appl.
Opt., 46, 4879, <ext-link xlink:href="https://doi.org/10.1364/AO.46.004879" ext-link-type="DOI">10.1364/AO.46.004879</ext-link>, 2007.</mixed-citation></ref>
      <ref id="bib1.bib37"><label>37</label><mixed-citation>
Tikhonov, A. N. and Arsenin, V. Y.: Solutions of Ill-Posed Problems, Math.
Comput., 32, 1320–1322, 1978.</mixed-citation></ref>
      <ref id="bib1.bib38"><label>38</label><mixed-citation>Wang, Y., Sartelet, K. N., Bocquet, M., and Chazette, P.: Modelling and
assimilation of lidar signals over Greater Paris during the MEGAPOLI summer
campaign, Atmos. Chem. Phys., 14, 3511–3532,
<ext-link xlink:href="https://doi.org/10.5194/acp-14-3511-2014" ext-link-type="DOI">10.5194/acp-14-3511-2014</ext-link>, 2014.</mixed-citation></ref>
      <ref id="bib1.bib39"><label>39</label><mixed-citation>
Weitkamp, C.: Lidar?: range-resolved optical remote sensing of the
atmosphere, Springer, New York, 2005.</mixed-citation></ref>
      <ref id="bib1.bib40"><label>40</label><mixed-citation>Whiteman, D. N.: Application of statistical methods to the determination of
slope in lidar data, Appl. Opt., 38, 3360, <ext-link xlink:href="https://doi.org/10.1364/AO.38.003360" ext-link-type="DOI">10.1364/AO.38.003360</ext-link>, 1999.</mixed-citation></ref>
      <ref id="bib1.bib41"><label>41</label><mixed-citation>Whiteman, D. N.: Examination of the traditional Raman lidar technique I
Evaluating the temperature-dependent lidar equations, Appl. Opt., 42, 2571,
<ext-link xlink:href="https://doi.org/10.1364/AO.42.002571" ext-link-type="DOI">10.1364/AO.42.002571</ext-link>, 2003.</mixed-citation></ref>
      <ref id="bib1.bib42"><label>42</label><mixed-citation>Whiteman, D. N., Melfi, S. H., and Ferrare, R. A.: Raman lidar system for the
measurement of water vapor and aerosols in the Earth's atmosphere., Appl.
Opt., 31, 3068–3082, <ext-link xlink:href="https://doi.org/10.1364/AO.31.003068" ext-link-type="DOI">10.1364/AO.31.003068</ext-link>, 1992.</mixed-citation></ref>

  </ref-list></back>
    <!--<article-title-html>Analysis of a warehouse fire smoke plume over Paris with an N<sub>2</sub> Raman lidar and an optical thickness matching algorithm</article-title-html>
<abstract-html><p>A smoke plume, coming from an accidental fire in a textile
warehouse in the north of Paris, covered a significant part of the Paris area
on 17 April 2015 and seriously impacted the visibility over the megalopolis.
This exceptional event was sampled with an automatic N<sub>2</sub> Raman
lidar, which operated 15&thinsp;km south of Paris. The industrial pollution episode
was concomitant with the long-range transport of dust aerosols originated
from the Sahara, and with the presence of an extended stratus cloud cover. The
analysis of the ground-based lidar profiles therefore required the
development of an original inversion algorithm, using a top-down aerosol
optical thickness matching (TDAM) approach. This study is, to the best of our
knowledge, the first lidar measurement of a fresh smoke plume, emitted only a
few hours after an accidental warehouse fire. Vertical profiles of the
aerosol extinction coefficient, depolarization ratio, and lidar ratio are derived to
optically characterize the aerosols that form the plume. We found a lidar
ratio close to 50±10&thinsp;sr for this fire smoke aerosol layer. The particle
depolarization ratio is low,  ∼ 1±0.1&thinsp;%, suggesting the presence
of either small particles or spherical hydrated aerosols in that layer. A
Monte Carlo algorithm was used to assess the uncertainties on the optical
parameters and to evaluate the TDAM algorithm.</p></abstract-html>
<ref-html id="bib1.bib1"><label>1</label><mixed-citation>
Ångström, A.: The parameters of atmospheric turbidity, Tellus A, 16,
64–75, <a href="https://doi.org/10.3402/tellusa.v16i1.8885" target="_blank">https://doi.org/10.3402/tellusa.v16i1.8885</a>, 1964.
</mixed-citation></ref-html>
<ref-html id="bib1.bib2"><label>2</label><mixed-citation>
Ansmann, A.: Ground-truth aerosol lidar observations: can the Klett solutions
obtained from ground and space be equal for the same aerosol case?, Appl.
Opt., 45, 3367, <a href="https://doi.org/10.1364/AO.45.003367" target="_blank">https://doi.org/10.1364/AO.45.003367</a>, 2006.
</mixed-citation></ref-html>
<ref-html id="bib1.bib3"><label>3</label><mixed-citation>
Ansmann, A., Riebesell, M., and Weitkamp, C.: Measurement of atmospheric
aerosol extinction profiles with a Raman lidar, Opt. Lett., 15, 746,
<a href="https://doi.org/10.1364/OL.15.000746" target="_blank">https://doi.org/10.1364/OL.15.000746</a>, 1990.
</mixed-citation></ref-html>
<ref-html id="bib1.bib4"><label>4</label><mixed-citation>
Ansmann, A., Wandinger, U., Riebesell, M., Weitkamp, C., and Michaelis, W.:
Independent measurement of extinction and backscatter profiles in cirrus
clouds by using a combined Raman elastic-backscatter lidar., Appl. Opt.,
31, 7113, <a href="https://doi.org/10.1364/AO.31.007113" target="_blank">https://doi.org/10.1364/AO.31.007113</a>, 1992.
</mixed-citation></ref-html>
<ref-html id="bib1.bib5"><label>5</label><mixed-citation>
Ansmann, A., Seifert, P., Tesche, M., and Wandinger, U.: Profiling of fine
and coarse particle mass: case studies of Saharan dust and
Eyjafjallajökull/Grimsvötn volcanic plumes, Atmos. Chem. Phys., 12,
9399–9415, <a href="https://doi.org/10.5194/acp-12-9399-2012" target="_blank">https://doi.org/10.5194/acp-12-9399-2012</a>, 2012.
</mixed-citation></ref-html>
<ref-html id="bib1.bib6"><label>6</label><mixed-citation>
Behrendt, A., Wulfmeyer, V., Schaberl, T., Bauer, H.-S., Kiemle, C., Ehret,
G., Flamant, C., Kooi, S., Ismail, S., Ferrare, R., Browell, E. V., and
Whiteman, D. N.: Intercomparison of Water Vapor Data Measured with Lidar
during IHOP_2002, Part II: Airborne-to-Airborne Systems, J. Atmos. Ocean.
Technol., 24, 22–39, <a href="https://doi.org/10.1175/JTECH1925.1" target="_blank">https://doi.org/10.1175/JTECH1925.1</a>, 2007.
</mixed-citation></ref-html>
<ref-html id="bib1.bib7"><label>7</label><mixed-citation>
Binietoglou, I., Basart, S., Alados-Arboledas, L., Amiridis, V., Argyrouli,
A., Baars, H., Baldasano, J. M., Balis, D., Belegante, L., Bravo-Aranda, J.
A., Burlizzi, P., Carrasco, V., Chaikovsky, A., Comerón, A., D'Amico, G.,
Filioglou, M., Granados-Muñoz, M. J., Guerrero-Rascado, J. L., Ilic, L.,
Kokkalis, P., Maurizi, A., Mona, L., Monti, F., Muñoz-Porcar, C.,
Nicolae, D., Papayannis, A., Pappalardo, G., Pejanovic, G., Pereira, S. N.,
Perrone, M. R., Pietruczuk, A., Posyniak, M., Rocadenbosch, F.,
Rodríguez-Gómez, A., Sicard, M., Siomos, N., Szkop, A., Terradellas,
E., Tsekeri, A., Vukovic, A., Wandinger, U., and Wagner, J.: A methodology
for investigating dust model performance using synergistic EARLINET/AERONET
dust concentration retrievals, Atmos. Meas. Tech., 8, 3577–3600,
<a href="https://doi.org/10.5194/amt-8-3577-2015" target="_blank">https://doi.org/10.5194/amt-8-3577-2015</a>, 2015.
</mixed-citation></ref-html>
<ref-html id="bib1.bib8"><label>8</label><mixed-citation>
Burton, S. P., Ferrare, R. A., Vaughan, M. A., Omar, A. H., Rogers, R. R.,
Hostetler, C. A., and Hair, J. W.: Aerosol classification from airborne HSRL
and comparisons with the CALIPSO vertical feature mask, Atmos. Meas. Tech.,
6, 1397–1412, <a href="https://doi.org/10.5194/amt-6-1397-2013" target="_blank">https://doi.org/10.5194/amt-6-1397-2013</a>, 2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib9"><label>9</label><mixed-citation>
Chazette, P. and Royer, P.: Springtime major pollution events by aerosol over
Paris Area: From a case study to a multiannual analysis, J. Geophys.
Res.-Atmos., 122, 8101–8119, <a href="https://doi.org/10.1002/2017JD026713" target="_blank">https://doi.org/10.1002/2017JD026713</a>, 2017.
</mixed-citation></ref-html>
<ref-html id="bib1.bib10"><label>10</label><mixed-citation>
Chazette, P., Pelon, J., and Mégie, G.: Determination by spaceborne
backscatter lidar of the structural parameters of atmospheric scattering
layers., Appl. Opt., 40, 3428–3440, 2001.
</mixed-citation></ref-html>
<ref-html id="bib1.bib11"><label>11</label><mixed-citation>
Chazette, P., Sanak, J., and Dulac, F.: New approach for aerosol profiling
with a lidar onboard an ultralight aircraft: application to the African
Monsoon Multidisciplinary Analysis., Environ. Sci. Technol., 41, 8335–8341,
<a href="https://doi.org/10.1021/es070343y" target="_blank">https://doi.org/10.1021/es070343y</a>, 2007.
</mixed-citation></ref-html>
<ref-html id="bib1.bib12"><label>12</label><mixed-citation>
Chazette, P., Raut, J.-C., Dulac, F., Berthier, S., Kim, S.-W., Royer, P.,
Sanak, J., Loaëc, S., and Grigaut-Desbrosses, H.: Simultaneous
observations of lower tropospheric continental aerosols with a ground-based,
an airborne, and the spaceborne CALIOP lidar system, J. Geophys. Res.,
115, D00H31,
<a href="https://doi.org/10.1029/2009JD012341" target="_blank">https://doi.org/10.1029/2009JD012341</a>, 2010.
</mixed-citation></ref-html>
<ref-html id="bib1.bib13"><label>13</label><mixed-citation>
Chazette, P., Dabas, A., Sanak, J., Lardier, M., and Royer, P.: French
airborne lidar measurements for Eyjafjallajökull ash plume survey, Atmos.
Chem. Phys., 12, 7059–7072, <a href="https://doi.org/10.5194/acp-12-7059-2012" target="_blank">https://doi.org/10.5194/acp-12-7059-2012</a>, 2012.
</mixed-citation></ref-html>
<ref-html id="bib1.bib14"><label>14</label><mixed-citation>
Chazette, P., Marnas, F., and Totems, J.: The mobile Water vapor Aerosol
Raman LIdar and its implication in the framework of the HyMeX and ChArMEx
programs: application to a dust transport process, Atmos. Meas. Tech., 7,
1629–1647, <a href="https://doi.org/10.5194/amt-7-1629-2014" target="_blank">https://doi.org/10.5194/amt-7-1629-2014</a>, 2014.
</mixed-citation></ref-html>
<ref-html id="bib1.bib15"><label>15</label><mixed-citation>
Chazette, P., Totems, J., Ancellet, G., Pelon, J., and Sicard, M.: Temporal
consistency of lidar observations during aerosol transport events in the
framework of the ChArMEx/ADRIMED campaign at Minorca in June 2013, Atmos.
Chem. Phys., 16, 2863–2875, <a href="https://doi.org/10.5194/acp-16-2863-2016" target="_blank">https://doi.org/10.5194/acp-16-2863-2016</a>, 2016.
</mixed-citation></ref-html>
<ref-html id="bib1.bib16"><label>16</label><mixed-citation>
Collis, R. T. H. and Russel, P. B.: Laser Monitoring of the Atmosphere,
edited by: Hinkley, E. D., Springer Berlin Heidelberg, Berlin, Heidelberg,
1976.
</mixed-citation></ref-html>
<ref-html id="bib1.bib17"><label>17</label><mixed-citation>
Dieudonné, E., Chazette, P., Marnas, F., Totems, J., and Shang, X.: Lidar
profiling of aerosol optical properties from Paris to Lake Baikal (Siberia),
Atmos. Chem. Phys., 15, 5007–5026, <a href="https://doi.org/10.5194/acp-15-5007-2015" target="_blank">https://doi.org/10.5194/acp-15-5007-2015</a>,
2015.
</mixed-citation></ref-html>
<ref-html id="bib1.bib18"><label>18</label><mixed-citation>
Di Girolamo, P.: Rotational Raman Lidar measurements of atmospheric
temperature in the UV, Geophys. Res. Lett., 31, L01106,
<a href="https://doi.org/10.1029/2003GL018342" target="_blank">https://doi.org/10.1029/2003GL018342</a>, 2004.
</mixed-citation></ref-html>
<ref-html id="bib1.bib19"><label>19</label><mixed-citation>
Dubovik, O., Holben, B., Eck, T. F., Smirnov, A., Kaufman, Y. J., King, M.
D., Tanré, D., and Slutsker, I.: Variability of Absorption and Optical
Properties of Key Aerosol Types Observed in Worldwide Locations, J. Atmos.
Sci., 59, 590–608, <a href="https://doi.org/10.1175/1520-0469(2002)059&lt;0590:VOAAOP&gt;2.0.CO;2" target="_blank">https://doi.org/10.1175/1520-0469(2002)059&lt;0590:VOAAOP&gt;2.0.CO;2</a>,
2002.
</mixed-citation></ref-html>
<ref-html id="bib1.bib20"><label>20</label><mixed-citation>
Groß, S., Gasteiger, J., Freudenthaler, V., Wiegner, M., Geiß, A.,
Schladitz, A., Toledano, C., Kandler, K., Tesche, M., Ansmann, A., and
Wiedensohler, A.: Characterization of the planetary boundary layer during
SAMUM-2 by means of lidar measurements, Tellus B., 63, 695–705,
<a href="https://doi.org/10.1111/j.1600-0889.2011.00557.x" target="_blank">https://doi.org/10.1111/j.1600-0889.2011.00557.x</a>, 2011.
</mixed-citation></ref-html>
<ref-html id="bib1.bib21"><label>21</label><mixed-citation>
Groß, S., Freudenthaler, V., Schepanski, K., Toledano, C., Schäfler,
A., Ansmann, A., and Weinzierl, B.: Optical properties of long-range
transported Saharan dust over Barbados as measured by dual-wavelength
depolarization Raman lidar measurements, Atmos. Chem. Phys., 15,
11067–11080, <a href="https://doi.org/10.5194/acp-15-11067-2015" target="_blank">https://doi.org/10.5194/acp-15-11067-2015</a>, 2015.
</mixed-citation></ref-html>
<ref-html id="bib1.bib22"><label>22</label><mixed-citation>
Haustein, K., Pérez, C., Baldasano, J. M., Müller, D., Tesche, M.,
Schladitz, A., Esselborn, M., Weinzierl, B., Kandler, K., and von
Hoyningen-Huene, W.: Regional dust model performance during SAMUM 2006,
Geophys. Res. Lett., 36, L03812, <a href="https://doi.org/10.1029/2008GL036463" target="_blank">https://doi.org/10.1029/2008GL036463</a>, 2009.
</mixed-citation></ref-html>
<ref-html id="bib1.bib23"><label>23</label><mixed-citation>
Kanitz, T., Ansmann, A., Seifert, P., Engelmann, R., Kalisch, J., and
Althausen, D.: Radiative effect of aerosols above the northern and southern
Atlantic Ocean as determined from shipborne lidar observations, J. Geophys.
Res. Atmos., 118, 12556–12565, <a href="https://doi.org/10.1002/2013JD019750" target="_blank">https://doi.org/10.1002/2013JD019750</a>, 2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib24"><label>24</label><mixed-citation>
King, L. V.: On the Complex Anisotropic Molecule in Relation to the
Dispersion and Scattering of Light, Proc. Royal Soc. London, 1, 333–357
available at:
<a href="http://www.researchgate.net/publication/247031191_On_the_Complex_Anisotropic_Molecule_in_Relation_to_the_Dispersion_and_Scattering_of_Light" target="_blank">http://www.researchgate.net/publication/247031191_On_the_Complex_Anisotropic_Molecule_in_Relation_to_the_Dispersion_and_Scattering_of_Light</a> (last access: 30 July 2014), 1923.
</mixed-citation></ref-html>
<ref-html id="bib1.bib25"><label>25</label><mixed-citation>
Klett, J. D.: Stable analytical inversion solution for processing lidar
returns, Appl. Opt., 20, 211, <a href="https://doi.org/10.1364/AO.20.000211" target="_blank">https://doi.org/10.1364/AO.20.000211</a>, 1981.
</mixed-citation></ref-html>
<ref-html id="bib1.bib26"><label>26</label><mixed-citation>
Mattis, I., Siefert, P., Müller, D., Tesche, M., Hiebsch, A., Kanitz, T.,
Schmidt, J., Finger, F., Wandinger, U., and Ansmann, A.: Volcanic aerosol
layers observed with multiwavelength Raman lidar over central Europe in
2008–2009, J. Geophys. Res., 115, D00L04, <a href="https://doi.org/10.1029/2009JD013472" target="_blank">https://doi.org/10.1029/2009JD013472</a>, 2010.
</mixed-citation></ref-html>
<ref-html id="bib1.bib27"><label>27</label><mixed-citation>
Measures, R. M.: Laser Remote Sensing: Fundamentals and Applications, edited
by: Wiley, J., Krieger publishing company, Malabar, Florida, USA, 1984.
</mixed-citation></ref-html>
<ref-html id="bib1.bib28"><label>28</label><mixed-citation>
Müller, D., Ansmann, A., Mattis, I., Tesche, M., Wandinger, U.,
Althausen, D., and Pisani, G.: Aerosol-type-dependent lidar ratios observed
with Raman lidar, J. Geophys. Res., 112, D16202,
<a href="https://doi.org/10.1029/2006JD008292" target="_blank">https://doi.org/10.1029/2006JD008292</a>, 2007.
</mixed-citation></ref-html>
<ref-html id="bib1.bib29"><label>29</label><mixed-citation>
Nicolae, D., Nemuc, A., Müller, D., Talianu, C., Vasilescu, J.,
Belegante, L., and Kolgotin, A.: Characterization of fresh and aged biomass
burning events using multiwavelength Raman lidar and mass spectrometry, J.
Geophys. Res.-Atmos., 118, 2956–2965, <a href="https://doi.org/10.1002/jgrd.50324" target="_blank">https://doi.org/10.1002/jgrd.50324</a>, 2013.

</mixed-citation></ref-html>
<ref-html id="bib1.bib30"><label>30</label><mixed-citation>
Nicolet, M.: On the molecular scattering in the terrestrial atmosphere?: An
empirical formula for its calculation in the homosphere, Planet. Space Sci.,
32, 1467–1468, <a href="https://doi.org/10.1016/0032-0633(84)90089-8" target="_blank">https://doi.org/10.1016/0032-0633(84)90089-8</a>, 1984.
</mixed-citation></ref-html>
<ref-html id="bib1.bib31"><label>31</label><mixed-citation>
Pappalardo, G., Amodeo, A., Pandolfi, M., Wandinger, U., Ansmann, A.,
Bösenberg, J., Matthias, V., Amiridis, V., De Tomasi, F., Frioud, M.,
Iarlori, M., Komguem, L., Papayannis, A., Rocadenbosch, F., and Wang, X.:
Aerosol lidar intercomparison in the framework of the EARLINET project 3
Raman lidar algorithm for aerosol extinction, backscatter, and lidar ratio,
Appl. Opt., 43, 5370, <a href="https://doi.org/10.1364/AO.43.005370" target="_blank">https://doi.org/10.1364/AO.43.005370</a>, 2004.
</mixed-citation></ref-html>
<ref-html id="bib1.bib32"><label>32</label><mixed-citation>
Pereira, S. N., Preißler, J., Guerrero-Rascado, J. L., Silva, A. M., and
Wagner, F.: Forest fire smoke layers observed in the free troposphere over
Portugal with a multiwavelength Raman lidar: optical and microphysical
properties., Sci. World J., 2014, 421838, <a href="https://doi.org/10.1155/2014/421838" target="_blank">https://doi.org/10.1155/2014/421838</a>,
2014.
</mixed-citation></ref-html>
<ref-html id="bib1.bib33"><label>33</label><mixed-citation>
Royer, P., Chazette, P., Lardier, M., and Sauvage, L.: Aerosol content survey
by mini N2-Raman lidar: Application to local and long-range transport
aerosols, Atmos. Environ., 45, 7487–7495,
<a href="https://doi.org/10.1016/j.atmosenv.2010.11.001" target="_blank">https://doi.org/10.1016/j.atmosenv.2010.11.001</a>, 2011.
</mixed-citation></ref-html>
<ref-html id="bib1.bib34"><label>34</label><mixed-citation>
Sasano, Y., Browell, E. V., and Ismail, S.: Error caused by using a constant
extinction/backscattering ratio in the lidar solution, Appl. Opt., 24,
3929, <a href="https://doi.org/10.1364/AO.24.003929" target="_blank">https://doi.org/10.1364/AO.24.003929</a>, 1985.
</mixed-citation></ref-html>
<ref-html id="bib1.bib35"><label>35</label><mixed-citation>
Shang, X. and Chazette, P.: End-to-End Simulation for a Forest-Dedicated
Full-Waveform Lidar Onboard a Satellite Initialized from Airborne Ultraviolet
Lidar Experiments, Remote Sens., 7, 5222–5255, <a href="https://doi.org/10.3390/rs70505222" target="_blank">https://doi.org/10.3390/rs70505222</a>,
2015.
</mixed-citation></ref-html>
<ref-html id="bib1.bib36"><label>36</label><mixed-citation>
Shcherbakov, V.: Regularized algorithm for Raman lidar data processing, Appl.
Opt., 46, 4879, <a href="https://doi.org/10.1364/AO.46.004879" target="_blank">https://doi.org/10.1364/AO.46.004879</a>, 2007.
</mixed-citation></ref-html>
<ref-html id="bib1.bib37"><label>37</label><mixed-citation>
Tikhonov, A. N. and Arsenin, V. Y.: Solutions of Ill-Posed Problems, Math.
Comput., 32, 1320–1322, 1978.
</mixed-citation></ref-html>
<ref-html id="bib1.bib38"><label>38</label><mixed-citation>
Wang, Y., Sartelet, K. N., Bocquet, M., and Chazette, P.: Modelling and
assimilation of lidar signals over Greater Paris during the MEGAPOLI summer
campaign, Atmos. Chem. Phys., 14, 3511–3532,
<a href="https://doi.org/10.5194/acp-14-3511-2014" target="_blank">https://doi.org/10.5194/acp-14-3511-2014</a>, 2014.
</mixed-citation></ref-html>
<ref-html id="bib1.bib39"><label>39</label><mixed-citation>
Weitkamp, C.: Lidar?: range-resolved optical remote sensing of the
atmosphere, Springer, New York, 2005.
</mixed-citation></ref-html>
<ref-html id="bib1.bib40"><label>40</label><mixed-citation>
Whiteman, D. N.: Application of statistical methods to the determination of
slope in lidar data, Appl. Opt., 38, 3360, <a href="https://doi.org/10.1364/AO.38.003360" target="_blank">https://doi.org/10.1364/AO.38.003360</a>, 1999.
</mixed-citation></ref-html>
<ref-html id="bib1.bib41"><label>41</label><mixed-citation>
Whiteman, D. N.: Examination of the traditional Raman lidar technique I
Evaluating the temperature-dependent lidar equations, Appl. Opt., 42, 2571,
<a href="https://doi.org/10.1364/AO.42.002571" target="_blank">https://doi.org/10.1364/AO.42.002571</a>, 2003.
</mixed-citation></ref-html>
<ref-html id="bib1.bib42"><label>42</label><mixed-citation>
Whiteman, D. N., Melfi, S. H., and Ferrare, R. A.: Raman lidar system for the
measurement of water vapor and aerosols in the Earth's atmosphere., Appl.
Opt., 31, 3068–3082, <a href="https://doi.org/10.1364/AO.31.003068" target="_blank">https://doi.org/10.1364/AO.31.003068</a>, 1992.
</mixed-citation></ref-html>--></article>
