Validation of TANSO-FTS/GOSAT XCO₂ and XCH₄ glint mode retrievals using TCCON data from near-ocean sites

Abstract. The thermal And near infrared sensor for carbon observations Fourier transform spectrometer (TANSO-FTS) on board the Greenhouse Gases Observing Satellite (GOSAT) applies the normal nadir mode above the land (“land data”) and sun glint mode over the ocean (“ocean data”) to provide global distributions of column-averaged dry-air mole fractions of CO₂ and CH₄, or XCO₂ and XCH₄. Several algorithms have been developed to obtain highly accurate greenhouse gas concentrations from TANSO-FTS/GOSAT spectra. So far, all the retrieval algorithms have been validated with the measurements from ground-based Fourier transform spectrometers from the Total Carbon Column Observing Network (TCCON), but limited to the land data. In this paper, the ocean data of the SRPR, SRFP (the proxy and full-physics versions 2.3.5 of SRON/KIT's RemoTeC algorithm), NIES (National Institute for Environmental Studies operational algorithm version 02.21) and ACOS (NASA's Atmospheric CO₂ Observations from Space version 3.5) are compared with FTIR measurements from five TCCON sites and nearby GOSAT land data.

For XCO₂, both land and ocean data of NIES, SRFP and ACOS show good agreement with TCCON measurements. Averaged over all TCCON sites, the relative biases of ocean data and land data are −0.33 and −0.13 % for NIES, 0.03 and 0.04 % for SRFP, 0.06 and −0.03 % for ACOS, respectively. The relative scatter ranges between 0.31 and 0.49 %. For XCH₄, the relative bias of ocean data is even less than that of the land data for the NIES (0.02 vs. −0.35 %), SRFP (0.04 vs. 0.20 %) and SRPR (−0.02 vs. 0.06 %) algorithms. Compared to the results for XCO₂, the XCH₄ retrievals show larger relative scatter (0.65–0.81 %).