Articles | Volume 11, issue 9
https://doi.org/10.5194/amt-11-5223-2018
https://doi.org/10.5194/amt-11-5223-2018
Research article
 | 
18 Sep 2018
Research article |  | 18 Sep 2018

Enhancing the consistency of spaceborne and ground-based radar comparisons by using beam blockage fraction as a quality filter

Irene Crisologo, Robert A. Warren, Kai Mühlbauer, and Maik Heistermann

Download

Interactive discussion

Status: closed
Status: closed
AC: Author comment | RC: Referee comment | SC: Short comment | EC: Editor comment
Printer-friendly Version - Printer-friendly version Supplement - Supplement

Peer-review completion

AR: Author's response | RR: Referee report | ED: Editor decision
AR by Irene Crisologo on behalf of the Authors (17 Aug 2018)  Author's response   Manuscript 
ED: Referee Nomination & Report Request started (24 Aug 2018) by Gianfranco Vulpiani
RR by Marco Gabella (27 Aug 2018)
ED: Publish as is (27 Aug 2018) by Gianfranco Vulpiani
AR by Irene Crisologo on behalf of the Authors (28 Aug 2018)
Download
Short summary
The calibration of ground-based weather radar (GR) can be improved a posteriori by comparing observed GR reflectivity to well-established spaceborne radar platforms (SR), such as TRMM or GPM. Our study shows that the consistency between GR and SR reflectivity measurements can be enhanced by considering the quality of GR data from areas where signals may have been blocked due to the surrounding terrain, and provides an open-source toolset to carry out corresponding analyses.