37 citations as recorded by crossref.

1. An Attention-Based Deep Sequential GRU Model for Sensor Drift Compensation T. Chaudhuri et al. 10.1109/JSEN.2020.3044388
2. Extraordinary performance of semiconducting metal oxide gas sensors using dielectric excitation R. Potyrailo et al. 10.1038/s41928-020-0402-3
3. Real-Time Remote Detection of Airborne Chemical Hazards—An Unmanned Aerial Vehicle (UAV) Carrying an Ion Mobility Spectrometer M. Allers et al. 10.1109/JSEN.2023.3287448
4. Using gas-phase air quality sensors to disentangle potential sources in a Los Angeles neighborhood A. Collier-Oxandale et al. 10.1016/j.atmosenv.2020.117519
5. The Potential of Low-Cost Tin-Oxide Sensors Combined with Machine Learning for Estimating Atmospheric CH4 Variations around Background Concentration R. Rivera Martinez et al. 10.3390/atmos12010107
6. Reconstruction of high-frequency methane atmospheric concentration peaks from measurements using metal oxide low-cost sensors R. Rivera Martinez et al. 10.5194/amt-16-2209-2023
7. Establishing Healthy Breath Baselines With Tin Oxide Sensors: Fundamental Building Blocks for Noninvasive Health Monitoring S. Heranjal et al. 10.1093/milmed/usae078
8. Application of Cluster Analysis to Examine the Performance of Low-Cost Volatile Organic Compound Sensors J. Kolarik et al. 10.3390/buildings13082070
9. Characterising the methane gas and environmental response of the Figaro Taguchi Gas Sensor (TGS) 2611-E00 A. Shah et al. 10.5194/amt-16-3391-2023
10. IAQ and ventilation measurements at the “ZEB Laboratory” office building in Norway M. Justo Alonso et al. 10.1016/j.indenv.2024.100063
11. Review of Engineering Controls for Indoor Air Quality: A Systems Design Perspective S. Li 10.3390/su151914232
12. Determining methane mole fraction at a landfill site using the Figaro Taguchi gas sensor 2611-C00 and wind direction measurements A. Shah et al. 10.1039/D3EA00138E
13. Drive-by Air Pollution Sensing Systems: Challenges and Future Directions H. Zarrar & V. Dyo 10.1109/JSEN.2023.3305779
14. Design and development of low-power, long-range data acquisition system for beehives - BeeDAS O. Anwar et al. 10.1016/j.compag.2022.107281
15. Rational Design of Semiconductor‐Based Chemiresistors and their Libraries for Next‐Generation Artificial Olfaction S. Jeong et al. 10.1002/adma.202002075
16. Hydrothermal synthesis of copper (׀׀) oxide-nanoparticles with highly enhanced BTEX gas sensing performance using chemiresistive sensor J. Gounder Thangamani & S. Khadheer Pasha 10.1016/j.chemosphere.2021.130237
17. Design, fabrication, and calibration of the Building EnVironment and Occupancy (BEVO) Beacon: A rapidly-deployable and affordable indoor environmental quality monitor H. Fritz et al. 10.1016/j.buildenv.2022.109432
18. Sorption Kinetics of Poly(ethyleneimine)–Poly(ethylene Oxide) Blends and the Implication for Low-Cost, Small-Scale CO2 Sensors Z. Siefker et al. 10.1021/acsapm.2c00361
19. Field Calibration of Low-Cost Mos Voc Sensors and Application for Source Characterization G. Hong et al. 10.2139/ssrn.4198986
20. Development of a low-cost UAV-based system for CH4monitoring over oil fields S. Liu et al. 10.1080/09593330.2020.1724199
21. Broadband Dielectric Spectroscopic Detection of Aliphatic Alcohol Vapors with Surface-Mounted HKUST-1 MOFs as Sensing Media P. Amoah et al. 10.3390/chemosensors10100408
22. Laboratory Performance Evaluation of a Low-Cost Electrochemical Formaldehyde Sensor Z. Pei et al. 10.3390/s23177444
23. Real-time measurements of formaldehyde emissions in a gross anatomy laboratory A. Baldelli et al. 10.1007/s42452-020-2569-7
24. Long-term field calibration of low-cost metal oxide VOC sensor: Meteorological and interference gas effects G. Hong et al. 10.1016/j.atmosenv.2023.119955
25. Sensing and Delineating Mixed-VOC Composition in the Air Using a Single Metal Oxide Sensor G. Thakor et al. 10.3390/cleantechnol3030031
26. Easy-to-Use MOX-Based VOC Sensors for Efficient Indoor Air Quality Monitoring R. Pietraru et al. 10.3390/s24082501
27. Flame-Made La2O3-Based Nanocomposite CO2 Sensors as Perspective Part of GHG Monitoring System M. Andreev et al. 10.3390/s21217297
28. Kitchen Area Air Quality Measurements in Northern Ghana: Evaluating the Performance of a Low-Cost Particulate Sensor within a Household Energy Study E. Coffey et al. 10.3390/atmos10070400
29. Characterizing methane and total non-methane hydrocarbon levels in Los Angeles communities with oil and gas facilities using air quality monitors K. Okorn et al. 10.1016/j.scitotenv.2021.146194
30. Broadband Dielectric Spectroscopic Detection of Ethanol: A Side-by-Side Comparison of ZnO and HKUST-1 MOFs as Sensing Media P. Amoah et al. 10.3390/chemosensors10070241
31. DP-IINK: A Framework for Drift Prediction With Inter- and Intranode Knowledge Transfer With Less Data Y. Zhang et al. 10.1109/JSEN.2023.3242981
32. Evaluating and optimising formic acid treatment against varroa mites on honey bees with MOx-sensors and a control loop D. Senger et al. 10.1016/j.atech.2023.100342
33. Statistical shape analysis pre-processing of temperature modulated metal oxide gas sensor response for machine learning improved selectivity of gases detection in real atmospheric conditions V. Krivetskiy et al. 10.1016/j.snb.2020.129187
34. A Novel E-Nose System for the Characterization of Dissolved Gases in Dielectric Oils J. Ardila-Rey et al. 10.1109/TIM.2023.3307177
35. Applications and Limitations of Quantifying Speciated and Source-Apportioned VOCs with Metal Oxide Sensors K. Okorn & M. Hannigan 10.3390/atmos12111383
36. Optimization of Metal Oxide Nanosensors and Development of a Feature Extraction Algorithm to Analyze VOC Profiles in Exhaled Breath M. Maciel et al. 10.1109/JSEN.2023.3288968
37. Using metal oxide gas sensors to estimate the emission rates and locations of methane leaks in an industrial site: assessment with controlled methane releases R. Rivera-Martinez et al. 10.5194/amt-17-4257-2024