Articles | Volume 9, issue 6
https://doi.org/10.5194/amt-9-2669-2016
https://doi.org/10.5194/amt-9-2669-2016
Research article
 | 
24 Jun 2016
Research article |  | 24 Jun 2016

Water vapor inhibits hydrogen sulfide detection in pulsed fluorescence sulfur monitors

Anders B. Bluhme, Jonas L. Ingemar, Carl Meusinger, and Matthew S. Johnson

Download

Interactive discussion

Status: closed
Status: closed
AC: Author comment | RC: Referee comment | SC: Short comment | EC: Editor comment
Printer-friendly Version - Printer-friendly version Supplement - Supplement
Download
Short summary
Hydrogen sulfide (H2S) is a malodorous, very poisonous, and flammable gas. It can be detected as SO2 using fluorescence after conversion using a hot catalyst. This technique is well established and as such also recommended by authorities such as the EPA. Our paper describes how at a relative humidity as low as 5 %, significant amounts of H2S pass the instrument undetected. At ambient levels of relative humidity, up to 1/3 of all H2S passes the instrument unnoticed.