The authors have done a good job addressing the reviewers comments. The paper is ready for publication, after the following technical corrections have been made:
Page 11, lines 19, 20 (referring to the change-tracked, revised manuscript): Please add "wide" after 9°C and 10°C. This clarifies that you mean the width of TR2, not the center.
In Fig. 3: There are no data points for Brewer 214 below 10°C. Either add the data points, OR remove the red line, and also remove the discussion of Brewer 214 tests below 10°C.
In Fig. 7 g,h: Lidenberg should be Lindenberg.
In the supplement: a0 and a2 seem to be reversed, either in Eq. 5, or in the table header. Please correct, and please also double-check the numbers.